LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 67

LaCie Ethernet Disk RAID
User Manual
5.7.6.2. Reconfiguring the Disks
CAUTION:
will delete all user information and all data on all
the disks.
Before you do this, have all the users disconnect
from all shared folders (as described in section
5.3. Disconnecting from Shared Folders Using
FTP) and remove protection from all disks (as
described in section
tion).
When you are done, you must re-add all users (as
described in section
new shared folders (as described in section
Creating Shared
again access the shared folders (as described in
section 6.1. Accessing Shared
tect their disks (as described in section
tecting Your
To change the disk configuration:
1. In the navigation bar, click Advanced.
2. In the left pane, click Disks.
3. In the Administrator password
password for logging in to the Manager.
4. Click Reconfigure
5. When the confirmation message appears, click OK.
The Disk Configuration
5.7.6.2.A.). The options that appear on this page vary,
depending on the number of hard disks that are cur-
rently installed in the system.
If you want to add or remove hard disks, do so one
at a time and click
adding disks, wait until the disk LED is green before
you click Scan. To accept the default disk configura-
tion (which will provide the best level of data pro-
tection available for the number of hard disks cur-
rently installed), click Next. By default, a linear disk
(Firmware version 1.4)
Changing the disk configuration
7.9.5. Removing Protec-
4.1.1. Adding Users), create
Folders), and have all users once
Folders) and pro-
7.2. Pro-
Disks).
text box, enter your
Disks.
page appears (see Fig.
Scan after each action. If you're
Managing Your Ethernet Disk RAID
5.5.1.
Fig. 5.7.6.2.A.
page