LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 7

LaCie Ethernet Disk RAID
User Manual
period of time. Otherwise, there is
an increased risk of electrical shock,
short-circuiting or fire.
Do not use the LaCie Ethernet
❖
Disk RAID near other electrical
appliances such as televisions or ra-
dios. Doing so may cause interfer-
ence which will adversely affect the
operation of the other products.
1GB = 1,000,000,000 bytes. 1TB = 1,000,000,000,000 bytes. Once formatted, the actual available
ImpOrTANT INfO:
storage capacity varies depending on operating environment (typically 5-10% less). In addition, the amount of used backup
capacity will be greater than the total size of all the disks listed on the Backups page because additional storage space is needed
for the data that has changed between backups. Actual capacity depends on RAID level (see page 130).
Any loss, corruption or destruction of data while using a LaCie drive is the sole responsibility of the
ImpOrTANT INfO:
user, and under no circumstances will LaCie be held liable for the recovery or restoration of this data. To help prevent the loss
of your data, LaCie highly recommends that you keep
instance, and a second copy either on your internal hard drive, another external hard drive or some other form of removable
storage media. LaCie offers a complete line of CD and DVD drives. If you would like more information on backup, please
refer to our web site.
(Firmware version 1.4)
Do not place the LaCie Ethernet
❖
Disk RAID near sources of mag-
netic interference, such as computer
displays, televisions or speakers.
Magnetic interference can affect
the operation and stability of your
LaCie Ethernet Disk RAID.
Do not place heavy objects on top
❖
of the LaCie Ethernet Disk RAID
or use excessive force on it.
TWO
LaCie Ethernet Disk RAID. If you
detect a problem, see the Trouble-
shooting section in this manual.
copies of your data; one copy on your external hard drive, for
Forward
page 
Never use excessive force on your
A shielded-type
CAUTION:
power cord is required in order
to meet FCC emission limits
and also to prevent interference
to the nearby radio and televi-
sion reception. It is essential
that only the supplied power
cord be used.