LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 41

LaCie Ethernet Disk RAID
User Manual
To change the authentication mode:
1. In the navigation bar, click Users.
2. In the left pane, click
Authentication Mode page displays the current au-
thentication mode. See figure 5.4.5.1.A.
3. In the Administrator password text box, enter the
password for accessing the storage system (not the
active directory password).
4. Click Change Authentication
5. If you are currently using Active Directory authen-
tication mode, click
to local authentication mode. All your existing user
data and user assignments are deleted, and you can
add new users (see section
assign them to shared folders (see section
ating Shared Folders).
If you are currently using local authentication
mode, the Active Directory Server page displays.
See figure 5.4.5.1.B.
6. In the Primary server IP address text box, enter the
IP address of your primary Active Directory server.
(You cannot use the server's name.)
7. If desired, enter the IP address of a secondary Active
Directory server in the Secondary server IP address
text box. (You cannot use the server's name.) This
server will be used if the primary Active Directory
server is not available. The secondary server must be
in the same domain as the primary server.
8. Click Next. The Active Directory User Login page
displays. See figure 5.4.5.1.C.
9. In the User name text box, enter the name of a user
who has privileges to access the Active Directory
tree. When accessing the Active Directory server,
this name will be appended with the fully qualified
domain name shown on this page.
(Firmware version 1.4)
Authentication Mode. The
Mode.
Yes when prompted to switch
5.4.1, Adding users) and
5.5.1, Cre-
Managing Your Ethernet Disk RAID
Fig. 5.4.5.1.A
Fig. 5.4.5.1.B
Fig. 5.4.5.1.C
page 0