LaCie 301161U - Ethernet Disk RAID NAS Server User Manual page 88

LaCie Ethernet Disk RAID
User Manual
13. To complete the installation and restart your com-
puter, click Finish.
If you do not want to restart your computer at this
time, select No, I will restart my computer later
then click Finish. When the confirmation message
appears, click OK. You do not have to restart the
computer immediately after installation, but you do
have to restart it before running Windows Backup
Software.
ImpOrTANT INfO:
your computer and you subsequently reinstall
Windows Backup Software, serious problems
can occur with your installation. It is strongly
recommended that you restart your computer at
your earliest convenience.
14. After you restart your computer, click
welcome message. The
pears. See Fig. 7.1.4.G.
15. Enter the key code for licensing the product and
click OK. The license key code is located on the back
of the Ethernet Disk RAID. If you have an Inter-
net connection, the license is activated automatically.
When you click
the Protect a Disk
about this wizard, refer to section
Your Disks.
If your Internet connection is temporarily down, or
if this computer doesn't have an Internet connection,
click OK on the warning message. The
wizard still starts, but after 30 days you will no longer be
able to perform backups or recovery until you activate
the license. For more information, refer to section
Activating Your License.
(Firmware version 1.4)
If you do not restart
OK
Add License dialog box ap-
OK on the confirmation message,
wizard starts. For information
7.2. Protecting
Protect a Disk
and
Fig. 7.1.4.F
on the
Fig. 7.1.4.G
ImpOrTANT INfO:
this key code on a different computer, an error
message appears, and you must re-activate your
license. For more information, refer to section
7.1.6. Activating Your
7.1.6.
Protecting Local Disks
page 
If you previously used
License.