3.8.2
NAS System Shutdown and Restart
To restart or shut down the subsystem:
1. Click the AdminTool tab.
2. Click the Subsystem Information button.
3. Click the Shutdown/Restart button.
4. Do one of the following actions.
Click the Shutdown button to shut down the subsystem.
Click the Restart button restart the subsystem.
I/O operations are stopped during this operation.
Click the Power Off button to turn off power to the subsystem.
After power off, unplug the power cord from the subsystem then plug
it in to reactivate the power supply unit.
3.8.3
Clearing Subsystem Statistics
To clear statistics on the physical drives, logical drives, and controller:
1. Click the AdminTool tab.
2. Click the Subsystem Information button.
3. Click the Clear Statistics button.
4. Click the Confirm button.
3.8.4
Software Service Management
Starting a Software Service
To start a software service:
1. Click the AdminTool tab.
2. Click the Service button.
49