2. Click the Logical Drive button.
3. Mouse-over the logical drive you want and click the Check Table
button.
4. Choose an option.
All – All errors. The default choice.
Read Check – Read errors for this logical drive.
Write Check – Write errors for this logical drive.
Inconsistent Block – Inconsistent blocks for this logical drive.
Mirror data for RAID Levels 1, 1E and 10.
Parity data for RAID Levels 5, 6, and 50.
Errors and inconsistent blocks are identified by Redundancy
Check.
Each Check Table lists:
Entry Number – A number assigned to each block of entry.
Table Type – Read Check, Write Check or Inconsistent Block.
Starting Logical Block Address – LBA of the first block for this
entry.
Count – Number of errors or continuous blocks starting from this
LBA.
Locating a Logical Drive
To locate a logical drive:
1. Click the Storage tab.
2. Click the Logical Drive button.
42