3.8.14 Message Alerts; Setting-Up Email Alert Service - D-Link DNS-1250-04 User Manual

 Power On LAN – When the NAS system is shut down, this feature
powers on automatically in the event of network activity.
 Power On Automatically – When to power on the NAS system
automatically.
4. Click the Save button.

3.8.14 Message Alerts

The Message Alert function allows the user to receive an e-mail alert for
the events of the NAS system.

Setting-up Email Alert Service

To set up the e-mail service for the NAS system:
1. Click the AdminTool tab.
2. Click the Message Alert button.
3. Click the Setup button.
4. Make the settings as required.
 Enable Services – Check to enable message alert service.
 SMTP Server – Enter the IP address of SMTP server.
 SMTP Port – Enter the port number of SMTP server
 From – The sender of the notification message.
 SMTP Authentication
 Username – Enter the username to log in the SMTP server.
 Password – Enter the password to log in the SMTP server.
5. Click the Save button.
63