Table of Contents
Advertisement
Advanced Setup
To configure your NAS system using Advanced Setup:
1. Go to the Main Window.
2. Click the Setup Wizard icon.
3. Click the Advanced Setup button.
4. Choose Automatic (DHCP) or Manual network settings.
5. If you chose Manual settings, type entries for each of the following
parameters in the fields provided.
Computer (NAS system) Name
IP Address
Subnet Mask
Gateway
Primary and Secondary DNS – optional
Click the Next button to continue.
6. Choose the following values from their respective dropdown menus.
Timezone
Year
Month
Day
Time in Hours, Minutes, and Seconds
Click the Next button to continue.
7. Choose Automatic or Manual RAID Volume creation.
105
Advertisement
Table of Contents
