Table of Contents
Advertisement
6. Click the Confirm button.
Synchronization Settings
To change Synchronization settings:
1. Click the AdminTool tab.
2. Click the Background Activity button.
3. Click the Settings button.
4. Click the Background Synchronization Rate dropdown menu and
choose a rate.
Low – Fewer system resources to Synchronization, more to data
read/write operations.
Medium – Balances system resources between Synchronization
and data read/write operations.
High – More system resources to Synchronization, fewer to data
read/write operations.
5. Click the Confirm button.
3.7.6
Logical Drive Problems
Logical drive problems typically result from a physical drive failure. The
most common problem is a critical logical drive. The RAID controller can
rebuild a critical logical drive.
A more serious but far less common problem is an Incomplete Array. An
incomplete disk array results from a physical drive that fails or becomes
missing during:
RAID level migration
Physical drive transport
45
Advertisement
Table of Contents
