Table of Contents
Advertisement
To create additional disk arrays, click the Create More button.
If you are done creating disk arrays, click the Finish button.
3.7.2
Creating a Logical Drive
After creating a disk array, you must create a logical drive on it.
To create a logical drive:
1. Click the Storage tab.
2. Click the Logical Drive button.
3. Click the Create Logical Drive button.
4. Click the disk array you want to use and click the Next button.
5. Make the required settings.
In the Alias field, enter an alias at a maximum of 32 characters
(includes letters, numbers, space between characters, and
underline).
Set the LDType.
NAS – Network Attached Storage
SAN/DAS – Storage Area Network / Direct Attached Storage
Choose a RAID Level from the dropdown menu.
The RAID levels available depend on the number of physical
drives in the disk array.
In the Capacity field, accept the default maximum capacity or
enter a lesser capacity (size in MB, GB or TB).
Any remaining capacity is available for an additional logical drive.
Choose the Stripe size
35
Advertisement
Table of Contents
