Disabling Plug-Ins; Removing Plug-Ins - D-Link DNS-1250-04 User Manual

5. Click the Enable button.
After a moment, the Service Status changes to ON.
The plug-in is now enabled on NAS system.

Disabling Plug-ins

Disabling a plug-in saves memory space and processing time on the
NAS system. If you do not use a feature, consider disabling its plug-in.
To disable a plug-in:
1. Go to the Main Window.
2. Click the NAS Management icon.
3. Click the Configuration Plug-in button.
4. Click the Plug-in you want to disable.
The plug-in is highlighted.
5. Click the Disable button.
After a moment, the Service Status changes to OFF.
The plug-in is now disabled.

4.4.10 Removing Plug-ins

There are two reasons to remove a plug-in:
 To replace the old plug-in with a new one.
 You know that you will never use the plug-in.
Removing Plug-ins
To remove a plug-in:
1. Go to the Main Window.
2. Click the NAS Management icon.
3. Click the Configuration Plugin button.
4. Click the Plug-in you want to remove.
112