4.4
Making Management Settings
4.4.1
Configuring a NAS System
The Setup Wizard has two modes:
One Click Setup – Loads a collection of default settings. Recommended
for most users.
Advanced Setup – Enables you to make your own settings.
Recommended for advanced users.
One Click Setup
To configure your NAS system using One Click Setup:
1. Go to the Main Window.
2. Click the Setup Wizard icon.
3. Click the One Click Setup button.
4. Click the OK button to continue.
5. Click the Yes button in the confirmation box.
The NAS reboots. Then your RAID volume is ready.
If you restore to the original folders on your PC, the
restore function overwrites the files in those folders.
Be careful which files you restore and where on your PC
you direct the backup files.
Caution
104