Enable or disable PDM.
Enable or disable Power Management.
5. Click the Save button.
Locating a Disk Array
To locate a disk array:
1. Click the Storage tab.
2. Click the Disk Array button.
3. Mouse-over the disk array you want and click the Locate button.
The drive carrier LEDs blink for one minute.
Disk Activity LED
Deleting a Disk Array
To delete a disk array:
1. Click Storage tab.
2. Click the Disk Array button.
3. Mouse-over the disk array you want and click the Delete button.
4. Click the Confirm button.
When you delete a disk array, you also delete logical
drives that belong to it, along with the data in the logical
drives.
Disk Status LED
Caution
39