Remote Control Accy Functions - Lexicon DC-1 - REV 1 Owner's Manual

Installation and
Calibration
Remote Control
ACCY Functions
10
Press and hold ACCY while pressing DONE to activate a "You Are Here" mode
which:
• Disables mute
• Sets volume to -30dB
• Centers Balance controls
• Loads the Pro Logic Effect
• Selects the VCR1 input
To assign different effects to the input buttons, the original assignment must be
cleared with the following procedure. Press and hold ACCY, then press BYPASS.
Press and hold ACCY again and press the input button. The display should show
EFFECT ASSIGNMENT CLEARED.
Assign a new effect to the input button by selecting the desired effect, pressing and
holding ACCY, then pressing the input button.
• Activates On-Screen display with 2
second timeout
• Sets Remote Trigger ON
• Sets all tone controls to 0dB or OFF
Lexicon