Saving Menu Configuration Data - Yaesu FT DX 9000 TFT Manual

You may save the current Menu configuration data to the CF card, for archive purposes or for quick changes in
extensive transceiver settings for different operating applications.
1. Press the [ F3 ]( SAVE ) key to open the Save win-
dow. If there are multiple file names already stored,
select the desired file by pressing the [ F6 ]( ) and
[ F7 ]( ) keys.
2. If you want to over-write the file name, go to step 3.
If you do not want to over-write the data on an
existing file name, and want to save the data in the
new file. Press the [ F4 ]( FILE ) key; now enter the
desired file name from your keyboard (the file ex-
tension will be ".mep" for Menu data).
3. Press the [ F3 ]( GO ) key to save the data into the
CF card.
If you wish to cancel the saving of the data, press
the [ F2 ]( CANCEL ) key.
Advice: When the ERROR message "PLEASE
CHECK A DISK" is displayed at the right side of the
MEM CARD notation, please confirm that the CF card
is inserted correctly into its slot.
When the memory data is saved in the CF card un-
der a previously-used file name, the old/previous data
will be over-written and the old data erased.
FT 9000 TFT O
DX
S M
AVING ENU
M
PERATION ANUAL
U
SING THE
C D
ONFIGURATION
Press [ F3 ]( SAVE )
Press [ F3 ]( GO )
M M
ENU
ATA
Page 45
ODE