Log Book Function; About The Log Book; Explanation Of The Function Keys On The Log Book Screen - Yaesu FT DX 9000 TFT Manual

L B
OG OOK
By connecting your keyboard (not supplied) to the transceiver's rear-panel KEYBOARD jack (PS/2 or USB), you
can create a Log Book within the radio, and display it on the TFT. Date, time, frequency, and mode will be
automatically stored, and you can save log data to the Compact Flash card for archive purposes.
E
XPLANATION OF THE
[ F1 ]( FUNC )
You may use the "CHECK" function to check the
log to see if a QSO has been made previously
with the logged station, and you may also create
a summary of QSOs by band and mode by press-
ing this key. The log may be viewed solely for the
current operator, or for all operators registered
into the Logbook and saved on the CF card.
[ F2 ]( )
Press this key to shift to the log line below the
current one.
[ F3 ]( )
Press this key to shift to the log line above the
current one.
Page 22
F
UNCTION
A
BOUT THE
F
UNCTION
L B
OG OOK
K L
EYS ON THE OG
[ F4 ]( EDIT )
Press this key to enable editing of previously-
stored log data.
[ F7 ]( SAVE/LOAD )
Press this key to engage the screen that allows
you to manage log data to be saved.
[ DISP ]( DISPLAY )
Press this key momentarily to move to the "T
/SWR I
PERATURE NDICATION
Press this key for 2 seconds to move to the "A
S /O
COPE SCILLOSCOPE
FT 9000 TFT O
DX
B S
OOK CREEN
" screen.
" screen.
M
PERATION ANUAL
-
EM
UDIO