Table of Contents
Advertisement
L
OG
IIt is possible to check the log in search for previous QSOs with a particular station. When a log entry of interest
is found, you may edit the information on that line, if you like.
1. Referring to the Figure 2 on page 23, enter the
desired callsign into the CALL field.
2. Press the [ F4 ]( CHECK ) key to show a list of any
previous QSOs with the specified station within
the current log. Any previous QSOs will appear on
a CHECK MODE list.
3. Use the [ F1 ]( ) , [ F2 ]( ) , [ F3 ]( ) , and [ F4 ]( )
keys to scroll through the data on the CHECK
MODE list.
Quick Point: In the Step 2, before doing a check for a duplicate QSO, a copy is made of the QSO record, and you
may then do editing of that record. Use the [ F1 ]( ) , [ F2 ]( ) , [ F3 ]( ) , and [ F4 ]( ) keys to select an item from
among CALL, RST, BAND, MODE and REM; when you press [ F5 ]( ONLY THIS ) , you'll copy only that item. When
you press [ F7 ]( EXIT ) , the TFT image changes to what you see on page 23; press [ ENTER ] on the keyboard to do
a duplicate check, and press [ ENTER ] once more to return to the log input page and copy the data.
If you select a line of data using the [ F1 ]( ) and [ F2 ]( ) keys, pressing [ F6 ]( ALL SELECT ) followed by [ F7 ]( ENTER )
will cause the TFT image to change to what you see on page 23, and you may now press the [ ENTER ] key on the
keyboard to do a duplicate check. Press [ ENTER ] once more to return to the log input page and copy the data to
that page (however, the NUMBER, RST, BAND, and MODE data will not be copied).
Previously-entered log data may be edited alter, if desired.
1. Referring to Figure 1 on page 23, press the [ F1 ]( ) / [ F2 ]( ) key to select the log data to be Editing.
2. Now you may ue the arrow keys on your keyboard to move the highlighted area through the log.
3. Use the keyboard to change data within the currently-highlighted area.
4. Press the [ F4 ]( RECORD ) key when you are fin-
ished editing the entries you have worked on.
If you do not wish to save your changes, press
the [ F5 ]( UN-RECORD ) key instead.
Advice: Data may easily be deleted, if you make a
mistake, enter duplicate data accidentally, etc.
To erase data, use steps (1) and (2) to select the data
to be erased. Then press [ ESC ] on the keyboard; the
data will be deleted. Press [ F4 ]( RECORD ) to return
to the screen depicted on page 23 and end this pro-
cedure.
FT
9000 TFT O
DX
B
P
OOK
REVIOUS
E
L
DITING
M
PERATION
ANUAL
L
B
OG
-QSO C
HECK
"P
B
E
OG
OOK
NTRIES
F
OOK
UNCTION
( CHECK )
-QSO C
" M
REVIOUS
HECK
ODE
"E
" M
DITING
ODE
Page 27
Advertisement
Table of Contents
