Simrad ES38B
Outline dimensions and installation drawings
32
Note
When you fasten the transducer to the mounting ring, apply
Loctite 270 on each bolt, and tighten the bolts several times.
Use maximum torque 32 Nm.
In addition to the drawings available in this chapter, additional
drawings are provided on our web site. See www.simrad.com.
Topics
• Outline dimensions [074647] on page 33
• Mounting ring [074076] on page 34
• Recommended arrangement [074544] on page 36
• Mounting procedure [088759] on page 38
• Support bar [206574] on page 39
338462/B