Table of Contents
Advertisement
Simrad ES200-7CD
HANDLING AND MAINTENANCE
Rules for transducer handling
12
You MUST observe the following rules for handling,
maintenance and painting.
Topics
Rules for transducer handling on page 12
Approved anti-fouling paints on page 13
Using self-locking taps on page 14
Note
Do not lift the transducer by the cable.
Do not expose the transducer to direct sunlight.
Do not expose the transducer to excessive heat.
Transport protection
Some transducers are delivered with a cover plate on the face
for protection during transport. Let this plate stay on as long as
possible, but do not forget to remove it before the vessel goes
into the sea.
Painting
An anti-fouling paint may be applied to the transducer face.
Because some paint types may be aggressive to the polyurethane
in the transducer face, please consult Simrad's list of approved
paints. See Approved anti-fouling paints on page 13.
Cleaning
The transducer face may be cleaned for shells and other marine
fouling. Be careful not to make cuts in the transducer face. Use a
piece of soft wood or a very fine grade emery paper.
307121/A
Advertisement
Table of Contents
