Various Scan Settings
E
Press [OK].
Note
❒ If you selected [Divide], the setting made here is applied to the last page of
each batch of divided originals.
Batch, SADF
This section describes the setting for scanning multiple originals multiple times.
To scan multiple originals as a single file, select [Batch].
To have the ADF scan multiple originals individually, select [SADF].
• If you select [Batch], scanning starts as soon as you place the additional origi-
nals and press {Start}. When all the originals have been scanned, press {q}.
If you select [Batch], regardless of the default settings, the machine waits until
additional originals are placed.
• If [SADF] is selected, scanning starts as soon as you place additional originals
in the ADF. Select which operation the machine performs while waiting for
additional originals in [Wait Time for Next Original(s): SADF] under [Scanner Fea-
tures]. For details about [Wait Time for Next Original(s): SADF], see General Set-
6
tings Guide "Scan Settings".
A
Press [Original Feed Type].
B
Select [Batch] or [SADF].
120