Ricoh Aficio MP 2500 General Settings Manual page 81

❖ Original Count Display
You can set to display the count of originals and copying pages on the display
when [On] is selected.
The default setting is Off.
❖ Reproduction Ratio
You can select which reduce, enlarge, or input ratio is shown on the display
with priority when [Reduce] or [Enlarge] is selected.
Reduce or Enlarge ratios for setting are as follows:
The default setting for Ratio 1 is 50% (Metric version) / 50% (Inch version).
The default setting for Ratio 2 is 71% (Metric version) / 65% (Inch version).
The default setting for Ratio 3 is 82% (Metric version) / 78% (Inch version).
The default setting for Ratio 4 is 93% (Metric version) / 93% (Inch version).
The default setting for Ratio 5 is 122% (Metric version) / 121% (Inch version).
The default setting for Ratio 6 is 141% (Metric version) / 129% (Inch version).
The default setting for Ratio 7 is 200% (Metric version) / 155% (Inch version).
❖ Preset R/E Priority
You can set the ratio with priority when [R/E] is selected.
Using the number keys, enter the ratio from "50-200" in units of 1%.
The default setting is 71% (Metric version) / 65% (Inch version).
❖ Duplex Margin
Specify left margin on the back side of copies, and top margin on the back
side. Select [Top Margin] or [Left Margin], and then set the required value.
• Top Margin: 0-50mm, 0"-2"
• Left Margin: 0-50mm, 0"-2"
The default setting is 5 mm (Metric version) / 0.2 inch (Inch version).
❖ Rotate Sort
Specify whether or not to select rotate sort when the {Sort} key (finisher not
installed), or {Sort/Staple} key (finisher installed) is pressed.
The default setting is Off.
When you select [On], you can select [Rotate Sort].
You cannot use the bypass tray with this function.
If you select [Off], when the finisher is not installed, only the Sort function is
available when you press the {Sort} key.
❖ Rotate Sort:Auto Continue
If you select [Off] when the paper tray in use runs out of paper, the machine
stops, allowing you to add paper so all copies can be rotate-sorted.
The default setting is Off.
❖ Auto Sort
You can set whether Auto Sort is "On" or "Off" when the machine is turned
on, reset, or modes are cleared.
The default setting is Off.
Copier Features
3
73