Ricoh Aficio MP 2500 General Settings Manual page 77

C
Enter attribute, and then press the {OK} key.
The attribute value may change depending on the server environment. Check
the attribute value complies with your server environment before setting it.
You can leave items blank, but you cannot leave attributes blank when
searching for e-mail addresses from the LDAP server Address Book.
Setting search options
A
Select [Search Options] using {U} or {T}, and then press the {OK} key.
B
Enter attribute, and then press the {OK} key.
To search the LDAP server data using a keyword other than prepared key-
words such as Name, E-mail Address, FAX Number, Company Name, and
Department Name, specify the attribute for the keyword registered in your
LDAP server, and the name to be displayed on the control panel during the
search. For example, to search e-mail addresses by employee number, enter
"employee No." in the Attribute field, and "Employee No." in the display
name field.
The attribute value may change depending on the server environment. Check
the attribute complies with your server environment before setting it.
C
Enter display name, and then press the {OK} key.
The registered "display name" appears as a keyword for searching LDAP.
Administrator Tools
69
2