Ricoh Aficio MP 2500 General Settings Manual page 32

Connecting the Machine
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
1
terface takes precedence.
Reference
p.47 "Interface Settings"
p.53 "File Transfer"
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending file with IEEE 802.11b (wire-
less LAN).
For details about how to specify the settings, see "Interface Settings" and "File
Transfer".
Menu
Interface Settings/Network Machine IPv4 Address
Interface Settings/Network IPv4 Gateway Address
Interface Settings/Network DNS Configuration
Interface Settings/Network DDNS Configuration
Interface Settings/Network Domain Name
Interface Settings/Network WINS Configuration
Interface Settings/Network Effective Protocol
Interface Settings/Network LAN Type
Interface Settings/Network Permit SNMPv3 Communictn.
Interface Settings/Network Permit SSL/TLS Comm.
Interface Settings/Network Host Name
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
Interface Settings/
IEEE 802.11b
File Transfer
24
User Tool
Communication Mode
SSID Setting
Channel
Security Type
Communication Speed
Default User Name/PW(Send)
Setting Requirements
Necessary
Necessary
As required
As required
As required
As required
Necessary
Necessary
As required
As required
As required
Necessary
As required
As required
As required
As required
As required