Interface Settings; Network - Ricoh Aficio MP 2500 General Settings Manual

General settings guide
Hide thumbs Also See for Aficio MP 2500:
Table of Contents

Advertisement

Interface Settings

This section describes the User Tools in the Interface Settings menu under Sys-
tem Settings.
Default settings are shown in bold type.

Network

This section describes the User Tools in the Network menu under Interface Set-
tings.
❖ Machine IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the [IP Add.] and [Subnet M] as
"xxx.xxx.xxx.xxx"("x" indicates a number).
• Auto-Obtain (DHCP)
• Specify
IPv4 Address: 011.022.033.044
Sub-net Mask: 000.000.000.000
The default setting is Specify.
The default setting for IPv4 Address is 011.022.033.044.
When you select [Specify], make sure that [IP Add.] is different from that of an-
other machines on the network.
The physical address (MAC address) also appears.
❖ IPv4 Gateway Address
A gateway is a connection or interchange point between two networks.
Specify the gateway address for the router or host computer used as a gateway.
The default setting is 000.000.000.000.
❖ Machine IPv6 Address
Specify the machine's IPv6 network address.
• Link-local Address
The machine's specified link-local address appears.
• Manual Config. Address
The machine's manually configuration address appears.
• Stateless Address: 1-5
The specified stateless address appears.
❖ IPv6 Gateway Address
Displays the machine's IPv6 gateway address appears.
❖ IPv6 Stateless Setting
Specify IPv6 Stateless Setting.
The default setting is Active.
Interface Settings
2
47

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio mp 2500spf7025Dsm625Ld125

Table of Contents