Ricoh Aficio MP 2500 General Settings Manual page 177

L
Press the {User Tools/Counter} key.
Note
❒ To change the name, see "Changing a Name".
Reference
p.170 "Changing a fax number"
p.170 "Programming the SUB Code"
p.171 "Programming the SEP Code"
p.172 "Setting the International TX Mode"
p.173 "Setting label insertion"
p.142 "Changing a Registered Name"
Using a Fax Destination as a sender
Following describes the procedure for using a fax number as the sender (sending
number).
A
Press [Details].
B
Select [Auth. Protect] using {U} or {T}, and then press the {OK} key.
C
Select [Register as] using {U} or {T}, and then press the {OK} key.
D
Select [Sender Only] using {U} or {T}, and then press the {OK} key.
Fax Destination
7
169