Advertisement
Quick Links
Advertisement
Related Manuals for HOOKE ROAD BXG.2010
Summary of Contents for HOOKE ROAD BXG.2010
- Page 1 Side Steps BXG.2010 (1)Contents: (2)Tools required: Socket Wrench; 16MM or 5⁄8 Deep-Well Socket;...
- Page 2 (3)Installation time: About 30 minutes, 1-2 persons needed. (Installation time is different according to individual person) (Please read all instructions thoroughly before starting installation) (4)Installation instruction: Note: The factory hardware will be used to mount the Steps. Step 1: Locate the body mount brackets on the side of the frame. Step 2: Remove the two 16MM nuts on either side of the Bushing Bolt, on both the forward and rear brackets.
- Page 3 Step 3: Lift the Step into position. Place the tongue of the Step mount over the Bushing Bolt washer and onto the studs. Step 4: Tighten the factory original bolts. Step 5: Repeat steps 1–4 on the other side.
- Page 4 Step 6: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke-Road product! AFTER BEFORE Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
Need help?
Do you have a question about the BXG.2010 and is the answer not in the manual?
Questions and answers