HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual page 59

WARNING: To reduce the risk of electrical shock or damage to the
equipment:
•
•
•
CAUTION: To reduce the risk of damage to the equipment, verify that all AC
Voltage Selector Switches are set to match your local AC line voltage
(115V or 230V). If the AC Voltage Selector Switches are not properly set, your
components will be damaged when power is applied.
6. After all the cables and power cords have been routed to their power destinations,
connect the power cords to a main power switch such as a properly rated power
distribution unit.
NOTE: If you are not using a power distribution unit, route the power cords directly to a
properly rated and grounded AC wall or floor outlet.
HP 10000 Series Rack Reference Guide
Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
When using an optional power distribution device, make sure that the
ground integrity is maintained for each connection by plugging each
component into a reliable grounded outlet.
Installing Components
4-25