HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual page 33

Stabilizing Feet
WARNING: To reduce the risk of personal injury, you must attach HP Series
rack stabilizing feet to all standalone (non-bayed) racks.
The Stabilizer Rack Option Kit contains three full-size and two modified
stabilizing feet.
•
The full-size stabilizing feet are for standalone racks. Attach one stabilizing foot
to the front and one to each side of the rack. Stabilizing feet are not required on
the back of a standalone rack.
•
The modified stabilizing feet are for bayed racks. Attach one modified foot to the
front of the rack when you place it between third-party racks.
NOTE: The Stabilizer Rack Option Kit components come standard with each 10622 rack.
Figure 3-6: Full-size stabilizing feet attached (top view)
HP 10000 Series Rack Reference Guide
Preparing the Rack for Component Installation
3-9