Required Tools; Checking The Hardware - HP 245161-B22 - 10642 42U Rack Shock Pallet Reference Manual

Preparing the Rack for Component Installation

Required Tools

You need the following tools to install your rack components:
•
Flat-bladed screwdriver
•
Phillips screwdrivers—#1, #2, and #3
•
Torx screwdrivers—T-10, T-15, T-25, and T-30
•
Adjustable wrench
•
Allen wrench
•
Cage nut fitting tool (included with original rack hardware kit)
For comfort and efficiency while setting up your rack and installing the components,
use battery-powered screwdrivers.

Checking the Hardware

After unpacking the rack and its components, locate the HP Rack Kit Components
List that was shipped with your rack. Verify that you received all listed components.
You will typically have extra fasteners after completing your rack configuration and
component installation.
IMPORTANT: Retain the extra fasteners for future use.
3-2 HP 10000 Series Rack Reference Guide