Preparing The Rack For Component Installation; Checking The Hardware; Hardware Kit Contents - HP 10000 G2 Series User Manual

Preparing the rack for component installation

Checking the hardware

After unpacking the component to be installed, locate the documentation that was shipped with that
component. Verify that you received all of the listed hardware pieces.
You will typically have extra fasteners after completing your component installation.
IMPORTANT:

Hardware kit contents

If any of the following items are missing or damaged, contact your HP authorized reseller.
M6 screws (50)
1.
Cage nut insertion tool (1)
2.
M5.5 x 10 self tapping screws (6)
3.
M6 cage nuts (50)
4.
T-25 Torx bit (1)
5.
Cable management bracket (6)
6.
Rack ID plate (1)
7.
Leveling foot base (4)
8.
Documentation CD (1)
9.
Retain the extra fasteners for future use.
Preparing the rack for component installation 10