Advertisement
Hardware contents
Identification
Quantity
A
4
B
18
C
6
D
18
E
2
F
2
J
3
H
18
Required tools
T-20 Torx driver
•
T-25 Torx driver
•
8-mm hex-nut driver
•
Rack warning
WARNING: To reduce the risk of personal injury or
damage to the equipment, be sure that:
• The leveling feet are extended to the floor.
• The full weight of the rack rests on the leveling
feet.
• The stabilizing feet are attached to the rack if it is
a single-rack installation.
• The racks are coupled together in multiple-rack
installations.
• Only one component is extended at a time. A
rack may become unstable if more than one
component is extended for any reason.
Description
Picture
M4 hex lock nut
(0535-0076)
M5 x 16-mm
screw
(0515-3019)
M4 x 6-mm
screw
(0515-4500)
M5 barrel nut
(0590-2318)
10–24 custom
nut
(A6093-00180)
M4 x 10-mm flat-
head screw
(0515-4499)
M4 x 8-mm
screw
(0515-0433)
M5 cage nut
(353039-002)
Anti-tip stabilizers
The anti-tip stabilizers provide stability and support when
equipment is installed, removed, or accessed within the rack.
Stabilizer kits are available in both 600-mm (23.62-in) and
800-mm (31.50-in) versions. Use the side feet provided with
these kits to stabilize stand-alone racks. If you are stabilizing
racks that are secured together with baying kits, the side feet
are optional on either end of the row.
Single racks with a mounted component exceeding 99.79 kg
(219.99 lb) do not require a stabilizer kit to be installed.
However, when extending a heavy unit for service, a kit is
recommended.
Single racks bolted to the floor or rack rows with four or more
bayed racks do not need a stabilizer kit installed.
Lift and lift handles
WARNING: If you are going to use a lift, be sure to
use a lift that can handle the load of your server. Do
not manually lift the server to install it. If a lift is not
available, use lift handle kit (A6752-04049).
Item
Reference
1
Lift handle panel (l)
2
Lift handle panel (r)
Part number
A6752-04045
A6752-04048
Advertisement
