Extron electronics NAV E 111 DTP3 User Manual
  1. Manuals
  2. Brands
  3. Extron electronics Manuals
  4. Media Converter
  5. NAV E 111 DTP3
  6. User manual
Extron electronics NAV E 111 DTP3 User Manual

Extron electronics NAV E 111 DTP3 User Manual

Streaming hdmi encoder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NAV E 111 DTP3
Streaming HDMI Encoder
User Guide
NAV Pro AV Over IP
68-2768-01, Rev. A
10 24

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NAV E 111 DTP3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Extron electronics NAV E 111 DTP3

Summary of Contents for Extron electronics NAV E 111 DTP3

  • Page 1 NAV E 111 DTP3 Streaming HDMI Encoder User Guide NAV Pro AV Over IP 68-2768-01, Rev. A 10 24...

  • Page 2: Safety Instructions

    Safety Instructions Safety Instructions • English Instructions de sécurité • Français AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le WARNING: This symbol, , when used on the product, is intended to produit, signale à l’utilisateur la présence à l’intérieur du boîtier du produit alert the user of the presence of uninsulated dangerous voltage within the d’une tension électrique dangereuse susceptible de provoquer un choc product’s enclosure that may present a risk of electric shock.
  • Page 3 安全说明 • 简体中文 警告： 产品上的这个标志意在警告用户, 该产品机壳内有暴露的危险 电压， 有触电危险。 注意： 产品上的这个标志意在提示用户, 设备随附的用户手册中有重 要的操作和维护(维修)说明。 关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍使 用的特性等相关内容， www.extron.com 敬请访问 Extron 网站 , ，参见 Extron 安全规范指南，产品编 www.extron.com 号 68-290-01 。 安全記事 • 繁體中文 안전 지침 • 한국어 경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는 警告: 若產品上使用此符號，...

  • Page 4: Fcc Class A Notice

    FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 5: Software Commands

    Software Commands Commands are written in the fonts shown here: ^AR Merge Scene,,0p1 scene 1,1 ^B 51 ^W^C.0 [01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03] E X! *X1&* X2)* X2#* X2! CE} NOTE: For commands and examples of computer or device responses used in this guide, the character “0”...

  • Page 7: Table Of Contents

    ............................56 Control System Secure Platform Device ..............................56 Toolbelt ..................................56 Secure Sockets Layer (SSL) Certificates ........................57 SSH 3rd Party Control ..............................57 Global Configurator Plus and Professional ........................58 Global Scripter ................................59 ControlScript Deployment Utility ...........................59 NAV E 111 DTP3 • Contents...
  • Page 8 Using the Command and Response Tables .........................61 Common Symbol Definitions .............................61 SIS Command and Response Tables ...........................62 Command and Response Table for NAV E 111 DTP3 Commands ................62 Command and Response Table for IP-Specific SIS Commands ................65 ............................66 Troubleshooting Alarms ..................................66...

  • Page 9: Introduction

    Features About this Guide This guide contains installation, configuration, and operating information for the NAV E 111 DTP3 Encoder. The encoder bridges the Extron DTP3 family of products into the Extron NAV family of streaming products. The NAV products stream video, audio, and serial communications over a managed IP network using multicast streaming technology.

  • Page 10: About The Decoder

    CONFIG NAVigator Control Blu-ray Network TLP Pro 1025M 00 B NAV/PoE Extron NAV SD 101 #1 Extron NAV E 111 DTP3 #1 Extron NAV E 111 DTP3 #1 OUTPUT CONTROL NAV SD 101 POWER 100-240V 0.8A AUDIO NAV E 111 DTP3 2.0 A MAX...

  • Page 11: Features

    • HDMI Output — Local HDMI output provides signal for a local display, an AV system, or a hardware codec, enabling monitoring or sharing of content without the need for a separate distribution amplifier. NAV E 111 DTP3 • Introduction...
  • Page 12 DTP3 transmitters and the NAV E 111 DTP3. • Compatible with CATx shielded twisted pair cable — The NAV E 111 DTP3 supports a maximum transmission distance of 330 feet (100 meters) for all compatible resolutions when used with CATx shielded twisted pair cable.

  • Page 13: Installation And Operation

    Installation and Operation This section describes the installation and the operation of the NAV E 111 DTP3, including: • Rear Panel Connections and Features • Front Panel Connection and Indicators • Startup and Basic Operation NOTE: For equipment mounting, see Mounting the NAV E 111 DTP3.

  • Page 14: Connector And Cable Details

    RJ-45 connectors. Both cables are limited to a length of 330 feet (100 meters). • DTP3 input port — Requires a shielded twisted pair (STP) cable for connection to an Extron DTP3 transmitter or DTP3 CrossPoint matrix switcher. NAV E 111 DTP3 • Installation and Basic Operation...
  • Page 15 • Afin de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et les connecteurs STP sont nécessaires. Extron recommends using the following practices to achieve full transmission distances up to 330 feet (100 m) and reduce transmission errors. NAV E 111 DTP3 • Installation and Basic Operation...

  • Page 16: Hdmi Connector

    4. Loosely place the included tie wrap around the HDMI connector and the LockIt lacing bracket as shown ( 5. While holding the connector securely against the lacing bracket, use pliers or similar tool to tighten the tie wrap, then remove any excess length ( NAV E 111 DTP3 • Installation and Basic Operation...

  • Page 17: Front Panel Connection And Indicators

    NAVigator HTML page. NOTE: The ID button triggers the Status on-screen display (OSD), which shows on the HDMI loop through port (see NAV E 111 DTP3 • Installation and Basic Operation...

  • Page 18: Startup And Basic Operation

    SIS commands cannot be issued directly to the decoder, but are issued via an Extron control system on the AV network, using a process known as “encapsulation” (see the NAVigator User Guide, available at www.extron.com for details). NAV E 111 DTP3 • Installation and Basic Operation...

  • Page 19: Reset Operations

    • Removes the initial serial number passwords and sets factory-configured username to admin them to extron. and password to extron. The RESET LED blinks four times in succession during the reset. NAV E 111 DTP3 • Installation and Basic Operation...
  • Page 20 RESET Figure 6. Resets 2. Release the RESET button and then immediately press and release the RESET button again. Nothing happens if you do not momentarily press RESET within 1 second. NAV E 111 DTP3 • Installation and Basic Operation...

  • Page 21: Html Operation

    HTML Operation This section introduces using the built-in HTML pages to configure and operate the NAV E 111 DTP3 encoder, including: • Opening the Embedded HTML Pages • Using the HTML Pages The encoder can be controlled and operated through either the front panel Configuration (USB) port (see...
  • Page 22 • The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of a complete system reset, the passwords revert to the default. • The default username is admin and the default password is extron. • Passwords are case sensitive. NAV E 111 DTP3 • HTML Operation...
  • Page 23 Stream Status indicator ¢ OUTPUT CONFIGURATION link ID button £ TIES link admin link ¤ TOOLS link Name banner ¥ MONITORING link About link ¦ SETTINGS link Show button § Control Panel Information indicator NAV E 111 DTP3 • HTML Operation...

  • Page 24: Using The Html Pages

    • Signing out is disabled when the encoder is accessed via proxy from the NAVigator (see the NOTES). Name banner — Displays the model name and host name. ¥ About link — Opens a pane that provides information about the NAV E 111 DTP3 (see About Page). ¦...

  • Page 25: Input Configuration Page

    6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Figure 11. Input Configuration Page NAV E 111 DTP3 • HTML Operation...
  • Page 26 Import to EDID Library — Click to import a custom external EDID to the encoder EDID library, slot 8 if the EDID supplied by the encoder does not meet your needs. NOTE: Import to EDID library ( ) is disabled when the encoder is accessed via proxy from another device (see the NOTES). NAV E 111 DTP3 • HTML Operation...
  • Page 27 Directly type a rate into the field. NOTE: The level meters ( ) are present only when analog is selected, either manually (Analog) or automatically (Auto Detect). TIP: Watching the level meters may help prevent overdriving the audio. NAV E 111 DTP3 • HTML Operation...
  • Page 28 The system cannot determine if the connected device uses DTP3 (48V) or DTP (12V). Using the wrong format can damage the device. 2. Click SAVE to take the change or CANCEL to abandon it. Clicking either button closes the dialog box. Figure 14. Remote Power Configuration Dialog Box NAV E 111 DTP3 • HTML Operation...

  • Page 29: Output Configuration Page

    Each pane has settings that can be changed by clicking the EDIT button (see figure ) in the appropriate pane. The selected dialog box opens (see Stream pane, Loop Thru pane, Test Pattern pane, AES67 Audio pane, Screen Saver pane, and On Screen Display (OSD) pane). NAV E 111 DTP3 • HTML Operation...
  • Page 30 NAV Audio Stream — Click to toggle NAV Audio Stream on (stream NAV audio) and off (do not stream). NOTE: NAV Audio can be routed only to other Extron NAV products. Select NAV Audio only when your system is interfacing solely with other NAV products and the audio needs minimal processing. NAV E 111 DTP3 • HTML Operation...
  • Page 31 HDMI Output port ( • Auto — Adjusts color bit depth based on the display EDID (10 bit or 8 bit) (default). • Force 8-Bit — Always uses 8 bit output. NAV E 111 DTP3 • HTML Operation...
  • Page 32 Test Pattern — Click the drop-down list to select among test patterns to display on the HDMI Output port ( ) and streamed outputs: • Disabled (no test pattern) • Color Bar (see figure 18) • Grayscale NAV E 111 DTP3 • HTML Operation...
  • Page 33 When Screen Saver Mute is unchecked ( ), the duration automatically becomes 501 Always on. After the duration expires, the encoder drops the active sync, allowing the monitor to turn off or enter low power mode. NAV E 111 DTP3 • HTML Operation...
  • Page 34 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Figure 21. Upload a Custom Image, Steps 1 and 2 NAV E 111 DTP3 • HTML Operation...
  • Page 35 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 NOTE: Click ) to delete the image. This action is necessary to replace the custom image. NAV E 111 DTP3 • HTML Operation...
  • Page 36 Status OSD, or Custom is selected, OSD OSD, Duration appears below OSD Type OSD Location (Available only when Custom is selected [ ]) — Click the drop-down list to select among the OSD location options. NAV E 111 DTP3 • HTML Operation...

  • Page 37: Typical Status Display

    NOTE: A valid custom line entry meets the following requirements: • The length is up to 64 characters. • All alphanumeric characters and ASCII symbols are permitted except | (pipe). • The custom line cannot start with a space. NAV E 111 DTP3 • HTML Operation...

  • Page 38: Ties Page

    NAVigator or decoder (see the NAVigator User Guide or the applicable decoder user guide, available at www.extron.com, and the embedded HTML tie page for those devices). Current Input pane The Current Input pane displays the input number and name of the encoder. NAV E 111 DTP3 • HTML Operation...
  • Page 39 • To tie AES67 from this encoder to a decoder, select that tab and click the desired decoder ( Available [see figure 26, ]). An AES67 audio tie is indicated in red. Click in an existing tie to untie it. Devices NAV E 111 DTP3 • HTML Operation...

  • Page 40: Tools Pages

    The encoder creates a file of current settings and, depending on your browser, may prompt you to confirm that you want to save them. 3. Click Keep to save the file to the Downloads folder or Discard as desired. NAV E 111 DTP3 • HTML Operation...

  • Page 41: Restore Tab

    1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Figure 30. Device Tools — Restore Function, Steps 5 and 6 NAV E 111 DTP3 • HTML Operation...

  • Page 42: Communication Settings

    2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 Figure 31. Tools — Firmware Function 2. Click SELECT FILE ( ). An Open dialog box opens (see figure 32). NAV E 111 DTP3 • HTML Operation...
  • Page 43 When the encoder reboots, the connection to it is momentarily lost and after a few seconds, the browser displays figure 8). To continue to operate the encoder, you must reconnect (see the home page Login dialog box (see Opening the Embedded HTML Pages). NAV E 111 DTP3 • HTML Operation...

  • Page 44: Reset Tab

    Any of these operations concludes with the encoder rebooting. NOTE: You must reconnect to the encoder (see Opening the Embedded HTML Pages) if you have additional operations to perform. NAV E 111 DTP3 • HTML Operation...
  • Page 45 Figure 37 shows the typical results of a Trace diagnostic. Figure 37. Trace Results Shown 4. Click CLEAR ( ) to reset the Address field if you want to run another diagnostic. NAV E 111 DTP3 • HTML Operation...

  • Page 46: Monitoring Pages

    5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 Figure 38. Dashboard Page NAV E 111 DTP3 • HTML Operation...
  • Page 47 * Power can be reported as among Off (remote power is off), DTP3 (48V) (the encoder is providing remote power to a DTP3 transmitter), or DTP (12V) (the encoder is providing remote power to a legacy DTP transmitter) for each indication (see Remote Power Pane to toggle power on and off). NAV E 111 DTP3 • HTML Operation...

  • Page 48: Alarms Pane

    Alarms Pane Indications when Alarms are Present NOTE: Click Manage Alarms (see figure 42, ) to open the Alarms page, from where you can clear alarms and enable and disable specific alarm reporting. NAV E 111 DTP3 • HTML Operation...

  • Page 49: Download Logs

    3 3 3 3 3 3 3 3 3 3 3 3 Figure 43. Clearing Alarms NOTES: • Critical alarms ( ) should be resolved immediately. • Warning alarms ( ) are less serious. NAV E 111 DTP3 • HTML Operation...

  • Page 50: Clearing Alarms

    1 1 1 1 Figure 44. Settings Page, General Tab Selected GENERAL page Device Details page, Date & Time page, or Click the down arrow ( ) to open a drop-down menu (see Username/Password page). NAV E 111 DTP3 • HTML Operation...

  • Page 51: Device Details Page

    Hyphens are allowed in any other position. character. • Cannot begin with a space. • Multiple tags are allowed, making • Spaces are allowed after the first character. filtering, sorting, and searching easier. NAV E 111 DTP3 • HTML Operation...
  • Page 52 Location — Click in this field and type in a location to customize your system. SAVE and CANCEL buttons — Click SAVE to take Device Details changes or CANCEL to abandon them. Clicking either button closes the editable pane. NAV E 111 DTP3 • HTML Operation...

  • Page 53: Date & Time Page

    Time Zone — Click the drop-down list to select the offset from Greenwich Mean Time (GMT). SAVE and CANCEL buttons — Click SAVE to take Date & Time changes or CANCEL to abandon them. Clicking either button closes the editable pane. NAV E 111 DTP3 • HTML Operation...
  • Page 54 NTP server — Click in these fields and type in the IP address or DNS name of an external NTP server. SAVE and CANCEL buttons — Click SAVE to take Date & Time changes or CANCEL to abandon them. Clicking either button closes the editable pane. NAV E 111 DTP3 • HTML Operation...
  • Page 55 ) to display the password as you type it. SAVE and CANCEL buttons — Click SAVE ( ) to take Password change or CANCEL to abandon it. Clicking either button closes the editable pane. NAV E 111 DTP3 • HTML Operation...

  • Page 56: Network Page

    ) to open a drop-down menu (see Network Connection page Ports page). 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Figure 53. Networking Settings Page NAV E 111 DTP3 • HTML Operation...
  • Page 57 NOTE: Editing of these settings is disabled when the encoder is assigned to a NAVigator and the EDIT button is unavailable for selection. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Figure 54. Network Connection Selection NAV E 111 DTP3 • HTML Operation...
  • Page 58 169.254.1.0 to 169.254.254.255, is assigned to the endpoint when no other address assignment methods are available. • MAC Address ( ) — A unique read-only identifier for network connected devices. NAV E 111 DTP3 • HTML Operation...

  • Page 59: Ports Page

    • See the NAV Series Pro AV Ports and Licenses Guide, available at www.extron.com, for more information on ports. SAVE and CANCEL buttons — Click SAVE to take Port changes or CANCEL to abandon them. Clicking either button closes the editable pane. NAV E 111 DTP3 • HTML Operation...

  • Page 60: Advanced Page

    ) to open a drop-down menu (see Advanced Networking page, LLDP page, and Confidence Preview page). 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Figure 58. Advanced Settings Page NAV E 111 DTP3 • HTML Operation...
  • Page 61 NAV devices on the network. • Multicast Video IP is the IP address that outputs the NAV video stream. • Multicast Audio IP is the IP address that outputs the NAV audio stream. NAV E 111 DTP3 • HTML Operation...
  • Page 62 ). Confidence Preview is a feature that shows the video output of the encoder on the HTML page ( ). This feature § helps to remotely validate video output during configuration or debugging. NAV E 111 DTP3 • HTML Operation...

  • Page 63: About Page

    Figure 62. About Pane The About pane provides the following useful information: Firmware version number, which is current NAV firmware version running. Installed licenses, which can be sorted by clicking the desired filtering letter. NAV E 111 DTP3 • HTML Operation...

  • Page 64: Control System

    Global Scripter • ControlScript Deployment Utility The NAV E 111 DTP3 can be remotely controlled from a host device such as a computer or Extron control system. The controlling device communicates over the network via the NAV/PoE+ port (see figure 2,...

  • Page 65: Secure Sockets Layer (Ssl) Certificates

    Third party control is available as a LinkLicense addition. Contact an Extron support representative on the Extron S3 Sales and Technical Support Hotline (see www.extron.com for the phone number in your region of the world). NAV E 111 DTP3 • Control Systems...

  • Page 66: Global Configurator Plus And Professional

    Access to the features of Global Configurator Professional is available to users who successfully complete Extron Control Professional Certification. For detailed descriptions and procedures to setup a control system with an IPCP Pro device and Global Configurator, see the applicable Global Configurator Help File. NAV E 111 DTP3 • Control Systems...

  • Page 67: Global Scripter

    • It is strongly recommended that all devices are updated to the latest firmware, to use all the features of this release of the ControlScript Deployment Utility. See the ControlScript Deployment Utility release notes, available at www.extron.com. NAV E 111 DTP3 • Control Systems...

  • Page 68: Sis Operation

    E14 — Invalid for this port configuration E17 — Invalid command for signal type E22 — Busy E24 — Privilege violation E25 — Device not present E28 — Bad file name or file not found NAV E 111 DTP3 • SIS Operations...

  • Page 69: Using The Command And Response Tables

    = Carriage return/line feed = Carriage return (no line feed) = Pipe (can be used interchangeably with the character) • = space = Escape key = Can be used interchangeably with the character NAV E 111 DTP3 • SIS Operations...

  • Page 70: Sis Command And Response Tables

    SIS Command and Response Tables Command and Response Table for NAV E 111 DTP3 Commands SIS Command Response Additional Description Command Function (Host to Unit) (Unit to Host) HDCP authorized device Default. Set input to HDCP authorized E1HDCP HdcpE1 Set input to HDCP not authorized...
  • Page 71 = Number of connected users — = Input video format = Not detected = HDMI = DVI • • = Connected streams < >, < >, < > hostname IP address Multicast IP NAV E 111 DTP3 • SIS Operations...

  • Page 72: Firmware Version

    = Dropped packets (in percent) — = IP address xxx.xxx.xxx.xxx X1& = Serial number • = Internal temperature = Firmware version = Full firmware version xxxx = Full firmware version — advanced xxxx-bnnn NAV E 111 DTP3 • SIS Operations...

  • Page 73: Command And Response Table For Ip-Specific Sis Commands

    Gateway *CISG and gateway DNS address Set DNS address EX3! Dnss X3$] Sets DNS servers for the NAV E 111 DTP3. DNSS You can list up to 3 DNS servers ( Clear all DNS addresses EX3! • DNSS Dnss *0.0.0.0...

  • Page 74: Troubleshooting

    Disk Space low. perform a software reset that deletes files (see Reset Tab). A critical process has failed, crashing Reboot the NAV E 111 DTP3. If the failure per- Firmware Failure Factory reset. the endpoint. sists, perform a NAV E 111 DTP3 • Troubleshooting...

  • Page 75: Memory Utilization

    Debug the network connectivity between the NTP Sync time from the specified NTP Server. NAV E 111 DTP3 and the specified NTP server. The clock to which all devices are Check network for flooding and correct PTPv2 PTP Master Stability synchronized is changing too packet priority.

  • Page 76: Video Loss

    Alarm Cause Remedy The NAV E 111 DTP3 is overheating. Check the ambient temperature of encoder Temperature Internal installation location. If greater than 140 °F, (60 ºC) use HVAC • system to lower ambient temperature. If ambient temperature is 140 °F, (60 °C) or •...

  • Page 77: Reference Information

    • Installation and service must be performed by authorized personnel only. • L’installation et l’entretien doivent être effectués par le personnel autorisé uniquement. The 1U high, half rack width NAV E 111 DTP3 can be placed on a table, mounted in a rack, or mounted under a desk or table.

  • Page 78: Ul Rack-Mounting Guidelines

    Consultez à cet égard les indications de la plaque d’identification de l’équipement. • Mise à la terre — Assurez-vous que l’équipement est correctement mis à la terre. Accordez une attention particulière aux connexions électriques autres. NAV E 111 DTP3 • Reference Information...

  • Page 79: Download A Firmware Or Software Package

    Download a firmware or software package as follows: NOTE: This procedure is used to download: • Software such as Toolbelt, Global Configurator Pro, and Global Scripter • NAV E 111 DTP3 firmware updates 1. Go to www.extron.com and momentarily rest the cursor over the Download tab (see figure 63, ).
  • Page 80 • Figure 66 may look different or may not appear at all, depending on your web browser choice and its security settings. • File names and version numbers on this page are sample values only. NAV E 111 DTP3 • Reference Information...
  • Page 81 A A A A Figure 67. Package Download Notification NOTE: Click the Subscribe link ( ) to receive an automatic e-mail notification if the package is updated. 8. Return to the Firmware tab. NAV E 111 DTP3 • Reference Information...

  • Page 82: Operation With Aes67 Audio

    See the user guide for the applicable device to configure that device and also the Dante documentation. ® Once you have configured the AES67 device, the device is displayed on the NAV E 111 DTP3 Configuration Audio pane), you can select a discovered Endpoints Input page.

  • Page 83: Extron Warranty

    In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.

Table of Contents