Standard Equipment And Specifications - RHINO 2409 Operator's Manual

Standard Equipment and Specifications

1.
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 48" bucket, external hydraulic system of 8 GPM with engine operating at 2500 RPM and relief
setting of 2400 PSI.
Horsepower Range
System pressure/flow rate
Lift Capacity to maximum height
Breakout force at pivot pin
Rollback force at ground line
Total weight with bucket (approx.)
Raising time to full height
Lower time
Attachment dump time
Attachment rollback time
Hydraulic system flow
System pressure at rated flow
(A) Maximum Lift Height at Pivot Pin
(B) Maximum Height Under Bucket
(C) Clearance with Bucket Dumped
(D) Reach at Maximum Height
(E) Maximum Dump Angle
(F) Reach with Attachment on Ground
(G) Attachment Rollback Angle
(H) Digging Depth
(I) Overall Height in Carry Position
(Manufacturers estimated specifications and design subject to change without notice.)
2409 01/11
© 2011 Alamo Group Inc.
OPERATION
30-45 HP
2400 PSI/ 8 GPM
1360 lbs.
4920 lbs.
2340 lbs.
1014 lbs.
5.5 seconds
3.59 seconds
2.06 seconds
2.25 seconds
8 GPM
2400 PSI
101"
---
86"
24"
44°
62"
17°
5.5"
54" @ top of upright
Operation Section 4-3