Standard Equipment And Specifications - RHINO 2410 Operator's Manual

1. Standard Equipment and Specifications

Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 96" material bucket operated with an average tractor hydraulic system of 13 GPM
with engine operating at 2200 RPM and control valve relief setting of 2650 PSI.
Horsepower Range
System pressure/flow rate
Lift Capacity to maximum height
Breakout force at pivot pin
Rollback force at ground line
Total weight with bucket (approx.)
Raising time to full height
Lower time
Attachment dump time
Attachment rollback time
Hydraulic system flow
System pressure at rated flow
(A) Maximum Lift Height at Pivot Pin
(B) Clearance with Bucket Dumped
(C) Reach at Maximum Height
(D) Maximum Dump Angle
(E) Reach with Attachment on Ground
(F) Attachment Rollback Angle
(G) Digging Depth
(H) Overall Height in Carry Position
(Manufacturers estimated specifications and design subject to change without notice.)
2410 02/10
© 2010 Alamo Group Inc.
OPERATION
30-90 HP
2650 PSI/ 13 GPM
2106 lbs.
7558 lbs.
3509 lbs.
1553 lbs.
5.89 seconds
4.38 seconds
4.38 seconds
2.62 seconds
13 GPM
2650 PSI
117"
88.5"
33"
42°
76"
24°
4.5"
64"
Operation Section 4-3