Table of Contents
Advertisement
Standard Equipment and Specifications
1.
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 68" pin on bucket, external hydraulic system of 10 GPM with engine operating at 2600 RPM
and relief setting of 2500 PSI.
Horsepower Range
System pressure/flow rate
Lift Capacity to maximum height
Breakout force at pivot pin
Rollback force at ground line
Total weight with bucket (approx.)
Raising time to full height
Lower time
Attachment dump time
Attachment rollback time
Hydraulic system flow
System pressure at rated flow
(A)
Maximum Lift Height at Pivot Pin
(B)
Maximum Height Under Bucket
(C)
Clearance with Bucket Dumped
(D)
Reach at Maximum Height
(E)
Maximum Dump Angle
(F)
Reach with Attachment on Ground
(G)
Attachment Rollback Angle
(H)
Digging Depth
(I)
Overall Height in Carry Position
(Manufacturers estimated specifications and design subject to change without notice.)
3109 01/11
© 2011 Alamo Group Inc.
OPERATION
30-50 HP
2500 PSI/ 10 GPM
1320 lbs.
4410 lbs.
3030 lbs.
980 lbs.
4.97 seconds
3.42 seconds
2.47 seconds
3.19 seconds
10 GPM
2500 PSI
111"
107
93"
24"
42°
62"
20°
5.5"
56" @ top of upright
Operation Section 4-3
Advertisement
Table of Contents
