Standard Equipment And Specifications - RHINO 2412 Operator's Manual

Standard Equipment and Specifications

1.
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 84" material bucket operated with an average tractor hydraulic system of 25.8 GPM
with engine operating at 2300 RPM and control valve relief setting of 2750 PSI.
Horsepower Range
System pressure/flow rate
Lift Capacity to maximum height
Breakout force at pivot pin
Rollback force at ground line
Total weight with bucket (approx.)
Raising time to full height
Lower time
Attachment dump time
Attachment rollback time
Hydraulic system flow
System pressure at rated flow
(A) Maximum Clearance at Full Height
(B) Clearance with Bucket Dumped
(C) Reach at Maximum Height
(D) Maximum Dump Angle
(E) Reach with Attachment on Ground
(F) Attachment Rollback Angle
(G) Digging Depth
(H) Overall Height in Carry Position
(Manufacturers estimated specifications and design subject to change without notice.)
2412 01/11
© 2011 Alamo Group Inc.
OPERATION
90-130 HP
2750 PSI/ 25.8 GPM
3056 lbs.
8240 lbs.
7244 lbs.
2060 lbs.
5.36 seconds
4.34 seconds
4 seconds
3.56 seconds
25.8 GPM
2750 PSI
149.5"
117"
39.69"
50°
89.5"
13°
4"
80"
Operation Section 4-3