RHINO 2409 LOADER Assembly Manual
Hide thumbs
Also See for 2409 LOADER:
- Operator's manual (106 pages) ,
- Assembly manual (4 pages) ,
- Assembly manual (4 pages)
Advertisement
Quick Links
AGCO ST45, ST55 and MASSEY FERGUSON 1165, 1445,
MODEL
AGCO ST45
AGCO ST55
MF 1165
MF 1445
MF 1455
MF 1455V
Mount kit can be installed using tools ordinarily
available. Shut off engine and engage brakes during
installation.
Check tire clearances once loader is installed and adjust
tire tread width and/or turning radius if necessary.
NOTE: Unless specified, leave all attaching hardware
loose until loader is completely assembled to facilitate
assembly and proper alignment. Torque hardware to
specifications listed on page 5.
TRACTOR PREPARATION
1. Shut off engine and engage brakes during
installation of mount kit.
2. Remove front weight bracket.
3. Raise hood and remove hood side panels to prevent
damage during loader mount installation.
INSTALLING LOADER MOUNT BRACKETS
(Figure 1)
1. Attach front mount bracket (3) using 14MM x 35MM
cap screws (9) and 9/16 lock washers (15).
2. Remove and discard 14MM cap screws and lock
washers where mid mount brackets are bolted to
tractor frame.
F-3926
ASSEMBLY MANUAL
Keep With Operators Manual
LOADER MOUNT KIT
2409 LOADER
1455, 1455V TRACTORS
2WD
FWA
X
X
X
X
X
X
3. Attach mid mounting brackets (1 & 2) to mounting
4. Reinstall hood side panels and lower hood to locked
1 of 6
CAB
LESS CAB
X
X
X
X
X
X
pads below tractor platform using 16MM x 40MM cap
screws (6) and 5/8 lock washers (10). Leave 16MM
cap screws (6) and 5/8 lock washers (10) loose to
ease installation.
A) AGCO ST45, MF1165 and MF 1445 requires two
5/8 spacers (5) each side between mid mounting
bracket and tractor frame.
B) AGCO ST45, MF1165 and MF1445 - Install mid
mounting bracket (1 & 2) to tractor frame using
14MM x 60MM cap screws (7), 9/16 flat washers (14)
and 9/16 lock washers (15).
C) AGCO ST55, MF1455 and MF1455V - Install mid
mounting brackets (1 & 2) to tractor frame using
14MM x 40MM cap screws (8), 9/16 flat washers (14)
and 9/16 lock washers (15).
To access bottom hole on frame, 14MM bolt (7 or 8),
9/16 flat washer (14) and 9/16 lock washer (15) must
pass through support tube of mid mounting
assembly (1 & 2).
position.
2-7233
3-23-04
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for RHINO 2409 LOADER
Summary of Contents for RHINO 2409 LOADER
- Page 1 ASSEMBLY MANUAL 2-7233 Keep With Operators Manual LOADER MOUNT KIT 2409 LOADER AGCO ST45, ST55 and MASSEY FERGUSON 1165, 1445, 1455, 1455V TRACTORS MODEL LESS CAB AGCO ST45 AGCO ST55 MF 1165 MF 1445 MF 1455 MF 1455V Mount kit can be installed using tools ordinarily 3.
- Page 2 2-7233 Figure 1 Mount Kit NOTES: Items 5 & 7 used for MF1445, MF1165 & AGCO ST45. Item 8 used for MF1455, MF1455V & AGCO ST55. Bolt items 2 & 3 to tractor frame through support tube of mountings. 3-23-04 2 of 6 F-3926...
- Page 3 2-7233 PARTS LIST - MOUNT KIT ITEM Part No. DESCRIPTION QTY. 52004 MID MOUNTING ASSEMBLY, Left 52005 MID MOUNTING ASSEMBLY, Right 52017 FRONT MOUNT ASSEMBLY 52138 YOKE ASSEMBLY, with Decal 43395-6 SPACER, Tube 5/8 YDP 42672-15 SCREW, Cap, 16MM-2.00MM x 40MM 42672-43 SCREW, Cap, 14MM-2.00MM x 60MM 42672-46...
- Page 4 2-7233 INSTALLING LOADER TO MOUNTING BRACKETS INSTALLING BUCKET OR OPTIONAL (Continued) ATTACHMENT 4. Install hose or valve kit to tractor and loader. Refer Refer to instructions provided with bucket or loader to installation instructions provided with hose or attachment to install bucket or attachment onto loader. valve kit.
- Page 5 2-7233 GENERAL TORQUE SPECIFICATIONS USE THE FOLLOWING TORQUES WHEN SPECIAL TORQUES ARE NOT GIVEN Standard American and Metric Cap Screws AMERICAN STANDARD CAP SCREWS METRIC CAP SCREWS SAE Grade Metric Class 10.9 Typ. Head Typ. Head Markings Markings Cap Screw Cap Screw TORQUE TORQUE...
- Page 6 2-7233 INSTALLATION INSTRUCTIONS 3-23-04 6 of 6 F-3926...
Need help?
Do you have a question about the 2409 LOADER and is the answer not in the manual?
Questions and answers