Standard Equipment And Specifications - RHINO 2407TL Operator's Manual

Standard Equipment and Specifications

1.
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 60" bucket, external hydraulic system of 8.0 GPM with engine operating at 2900 RPM and
relief setting of 2000 PSI.
Horsepower Range
System pressure/flow rate
Lift Capacity to maximum height
Breakout force at pivot pin
Total weight with bucket (approx.)
Raising time to full height
Lower time
Bucket dump time
Bucket rollback time
Hydraulic system flow
System pressure at rated flow
A. Maximum Lift Height at Pivot Pin
B. Maximum Height Under Bucket
C. Clearance with Bucket Dumped
D. Reach at Maximum Lift Height
E. Maximum Dump Angle
F. Reach with Bucket on Ground
G. Bucket Rollback Angle
H. Digging Depth
I. Overall Height in Carry Position
(Manufacturers estimated specifications and design subject to change without notice.)
2407TL 01/11
© 2011 Alamo Group Inc.
OPERATION
20-30 HP
2000 PSI/ 8 GPM
1035 lbs.
1770 lbs.
735 lbs.
2.7 sec.
2.0 sec.
2.6 sec.
2.6 sec.
8 GPM
2000 PSI
83"
78"
66"
30"
45°
59"
25°
4"
47.50"
Operation Section 4-3