Standard Equipment And Specifications - RHINO LOADER 4211 Operator's Manual

Standard Equipment and Specifications

1.
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 72" material bucket operated with an average tractor hydraulic system of 16.5 GPM
with engine operating at 2300 RPM and control valve relief setting of 2900 PSI.
Horsepower Range
System pressure/flow rate
Lift Capacity to maximum height
Breakout force at pivot pin
Rollback force at ground line
Total weight with bucket (approx.)
Hydraulic system flow
System pressure at rated flow
(A) Maximum Lift Height at Pivot Pin
(B) Clearance with Bucket Dumped
(C) Reach at Maximum Height
(D) Maximum Dump Angle
(E) Reach with Attachment on Ground
(F) Attachment Rollback Angle
(G) Digging Depth
(H) Overall Height in Carry Position
(Manufacturers estimated specifications and design subject to change without notice.)
4211-4211SS 01/11
© 2011 Alamo Group Inc.
OPERATION
4211
50-80 HP
2900 PSI/ 16.5 GPM
2150 lbs.
6216 lbs.
3410 lbs.
1825 lbs.
16.5 GPM
2900 PSI
129"
94"
35"
55°
83"
39°
5"
66"
Operation Section 4-3
4211SS
50-80 HP
2900 PSI/ 16.5 GPM
2960 lbs.
5790 lbs.
3410 lbs.
1883 lbs.
16.5 GPM
2900 PSI
131"
97"
35"
60°
83"
40°
4"
67"