Standard Equipment And Specifications - RHINO 2409TL Operator's Manual

Standard Equipment and Specifications

1.
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 72" bucket, external hydraulic system of 12 GPM with engine operating at 2500 RPM and
relief setting of 2650 PSI.
Break-away Capacity
At Bucket Pivot Point
500 mm Forward of Bucket Pivot Point
Lift Capacity at Full Height
At Bucket Pivot Point
500 mm Forward of Bucket Pivot Point
Raising Time
Lowering Time
Bucket Dumping Time
Bucket Rollback Time
Weight w/ 72" HD Material Bucket (w/o Mounting/Valve Kit)
Lift Cylinder
Stroke
Piston Diameter
Rod Diameter
Bucket Cylinder
Stroke
Piston Diameter
Rod Diameter
(A) Maximum Lift Height at Pivot Pin
(B) Maximum Height Under Bucket
(C) Clearance with Bucket Dumped
(D) Reach at Maximum Height
(E) Maximum Dump Angle
(F) Reach with Attachment on Ground
(G) Attachment Rollback Angle
(H) Digging Depth
(I) Overall Height in Carry Position (at Boom Arm Top)
(Manufacturers estimated specifications and design subject to change without notice.)
2409TL 01/11
© 2011 Alamo Group Inc.
OPERATION
Operation Section 4-3
3890 lbs.
2880 lbs.
2800 lbs.
2180 lbs.
4.4 sec
2.9 sec
1.6 sec
1.7 sec
790 lbs.
2.5 in
17.69 in
2.5 in
1.38 in
2.0 in
18.12 in
2.0 in
1.38 in
112.5"
106.35"
90.5"
17.8"
47°
63.7"
22.5°
5.5"
58.8" @ boom arm top