Download Print this page

Spectrum Industries 37433 Assembly Instructions

Aspire esports desk

Advertisement

Quick Links

Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Note: Instruction images below show a 36"W Aspire Esports desk assembly. Steps are the same for the 72"W version.
(1) Worksurface
0202906 (36"W)
0203245 (72"W)
(1) Cord channel 1
0203062 (36"W)
0203256 (72"W)
(1) Cord channel 2
0203064 (36"W)
0203249 (72"W)
Aspire Esports Desk
37433
Assembly tip: Do not tighten component fasteners completely
until all have been installed. Keeping them loose will help with
alignment between parts during assembly.
(1) 0157881
Reinforcement bar
(4) 0192358
Adjustable Leg
4mm
0101382
#14 x 7/8" PHSM
(43) for 36"W
(51) for 72"W
035728
1/4-20 x 1/2" PHMS
(3) for 36"W
(5) for 72"W
(1) 036281
Unit-to-unit bracket
0600032R1 Page 1 of 4

Advertisement

loading
Need help?

Need help?

Do you have a question about the 37433 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Spectrum Industries 37433

  • Page 1 800-235-1262, 715-723-6750 Thank you for purchasing Spectrum products! Aspire Esports Desk 37433 Assembly tip: Do not tighten component fasteners completely until all have been installed. Keeping them loose will help with (1) Worksurface alignment between parts during assembly.
  • Page 2 Attach reinforcement bar to worksurface #14 x 1” PHSM (8 for 36”W) (14 for 72”W) Reinforcement Note: Align the reinforcement bar with the pre-drilled holes under the worksurface. Secure with #14 x 7/8” PHSM screws, but do not overtighten. Attach legs to worksurface Adjustable leg #14 x 7/8”...
  • Page 3 Install cord channel #14 x 7/8” PHSM Cord channel 1 1/4-20 x 1/2” PHMS #14 x 7/8” PHSM (3 for 36”W) (3 for 36”W) (5 for 72”W) (5 for 72”W) Cord channel 2 0600032R1 Page 3 of 4...
  • Page 4 Unit-to-unit bracket (optional) Locking casters (if equipped) Unit-to-unit bracket #14 x 7/8” PHSM 1500 RIVER STREET, PO BOX 400, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM © 2025 Spectrum Industries Inc., All rights reserved. 0600032R1 Page 4 of 4...