Spectrum Industries Aspire 37430 Assembly Instructions

Assembly Instructions
Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 0176898
Worksurface
(1) 0171352
Audience-side
panel
(4) 0105662
60mm 5/16-18 x 1"
Stem Caster
1
Attach casters to legs
1. Attach casters to legs and tighten.
Leg
(3) 0171406
Support bracket
(2) 0171350
Leg
(22) 035594
#10 x 5/8"
PHSM
2
1. Place the worksurface face-down onto a non-abrasive surface.
2. Orient the legs as shown with the flange toward the center.
3. Attach each leg to the worksurface with (2) screws.
X4
(2) #10 x 5/8"
PHSM screws
Table for Aspire Workstation
37430
Assembly tip: Do not tighten component fasteners completely
until all have been installed. Keeping them loose will help with
alignment between parts during assembly.
Attach legs to worksurface
Leg
1
/
"
2
(2) #10 x 5/8"
Leg
PHSM screws
0193940 Page 1 of 2