Advertisement
Quick Links
Original Desk
Assembly Instructions
Tools Required:
Pencil
Electric Drill
7mm Spanner
*or adjustable spanner
5.0mm Drillbit
*if fixing from below
2.5mm Drillbit
*if fixing from above
16mm
*if routing the tablet
cable through your
Holesaw
mounting surface
Socket Driver
Sheet Code:
BP-IM-028_REV4
Release Date:
12/05/2025
Copyright 2025 SpotSpot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Minimum Mounting
surface thickness :
Metric
Imperial
34
1
mm
5/16"
Follow steps B if "Fixing
B
from Above".
Mount Washer
4x M4 Split Washer
4x M4 Locking Nut
7mm Spanner
Mount Washer
4x M4 Split Washer
4x M4 Wing Nut
Secure the Desk to the
A4
surface. Locking Nuts
offer higher security.
Tablet Set-up Kit
Fixings Kit
Faceplate
Case
Pair of Keys
Desk
Mounting
Arm
Surface
Mounting Kit
In the Box
Mount Washer
4x Ø5.0mm
1x Ø16.0mm
Front
Using the Mount Washer,
A1
mark the drill hole
locations as shown.
Mount Plate
*see overleaf
Front
A5
B1
Go to step 1.
4x No.8
4x M4x12mm
Countersunk,
Countersunk
Self Tapping
Screw **
Screw
4x M4x40mm
4x M4x16mm
Socketset
Buttonhead
Screw
Screw *
1x T20 Pin
Torx Driver Bit
1x Mount
1x Case
8x M4 Split
Washer
Washer
Washer
Fixings List
Due to the modular nature of our product range you
may receive additional fixings in the fixings kit.
* Previous models may have been supplied with 20mm.
** Previous models may have been supplied with 10mm.
Ø5.0mm Drillbit
Ø16.0mm Holesaw
Drill each hole -
A2
using the specified
drill size.
4x Ø2.5mm
1x Ø16.0mm
Using the Mount Plate,
mark the drill hole
locations as shown.
4x M4
Wing Nut
4x M4
Locking
Nut
Maximum Mounting
surface thickness :
Metric
Imperial
25
1"
mm
Follow steps A if "Fixing
A
from below".
Tighten screw(s) using hand
tools, using electric tools may
damage your Bouncepad.
4x M4x40mm
Locate and screw the Socket
A3
Screws into the Desk as shown.
Ø2.5mm Drillbit
Ø16.0mm Holesaw
Drill each hole - using the specified
B2
drill sizes.
Front
Socketset
Screw
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for bouncepad Original Desk
Summary of Contents for bouncepad Original Desk
- Page 1 Mounting Kit Copyright 2025 SpotSpot Ltd. (T/A Washer Washer Washer Bouncepad) all rights reserved. Confidential, no part of this publication Fixings List may be reproduced or transmitted in any Follow steps A if “Fixing form without the written permission of the...
- Page 2 Countersunk, Self Tapping Screw Front Front Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad. Locate the Secure the Desk to the Adhere the Mount Cover Join the Desk & Mount Plate in the Cover onto surface with the 4x onto the Mount Plate orientation shown.
- Page 3 Sheet Code: BP-IM-075_REV3 Release Date: 22/06/2022 Copyright 2022 Spotspot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication may be reproduced or transmitted in any Fixings List form without the written permission of the In the Box * Due to the modular nature of copyright holder.
- Page 4 M4 Machine Screw M4 Split Washer Tablet Charger Cable Case Washer Payment Device Charger Cable Attach the Case and Self-Service Feed your charge cables through the Return to the Main Product Manual Mount to the Mounting arm with the Mounting Arm. to complete the assembly.
Need help?
Do you have a question about the Original Desk and is the answer not in the manual?
Questions and answers