Advertisement
Quick Links
Original Flip
Assembly Instructions
Tools Required:
All tools provided
Sheet Code:
BP-IM-030_REV2
Release Date:
12/05/2025
Copyright 2025 SpotSpot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Remove the End Plates from the Flip
1
using the Flip Tool.
Unlock & remove the Faceplate from
4
the Case.
Faceplate
Case
Fixings Kit
Flip
Pair of Keys
Tablet Set-up Kit
In the Box
If wishing to slide your Flip across
2
your mounting surface, apply the
supplied Felt Feet as shown.
4x Tablet Supports
Install the Tablet Setup Kit. Each kit is
5
specific per Tablet and Case.
Fixings List
Due to the modular nature of our product range you
may receive additional fixings in the fixings kit.
* Previous models may have been supplied with 20mm.
3
4x Corner Pieces
1x Cable Clip
6
4x M4x16mm
Buttonhead
Screw *
4x M4 Split
Washer
1x T20 Pin
Torx Allen
Key
1x Case
Washer
4x Felt Feet
1x Flip Tool
T20 Pin Torx Allen key
4x M4x16mm
Buttonhead Screw
4x M4 Split Washer
Case Washer
Tighten screw(s) using hand
tools, using electric tools may
damage your Bouncepad.
Attach the Case to the Flip. Take
care to ensure correct & full thread
engagement.
Route the Power Cable through the
Case & Flip - securing it with the
Cable Clip.
Advertisement
Related Manuals for bouncepad Original Flip
Summary of Contents for bouncepad Original Flip
- Page 1 BP-IM-030_REV2 Release Date: 12/05/2025 1x Flip Tool Copyright 2025 SpotSpot Ltd. (T/A Bouncepad) all rights reserved. Confidential, no part of this publication Fixings List may be reproduced or transmitted in any form without the written permission of the In the Box Due to the modular nature of our product range you may receive additional fixings in the fixings kit.
- Page 2 Install & connect your chosen Tablet Locate & lock the Faceplate to the Connect the Power Cable to its mains into the Case. Case - securing your tablet. power source. Key number here Approximate maximum Battery Pack *We recommend recording the dimensions: 91mm (length) x 56mm key number so you can purchase (width) x 25mm (Height).
Need help?
Do you have a question about the Original Flip and is the answer not in the manual?
Questions and answers