Advertisement
Quick Links
Core Floorstanding
Assembly Instructions
Tools Required:
Socket Driver
10mm Spanner
*or adjustable spanner
Sheet Code:
BP-IM-092_REV0
Release Date:
15/08/2024
Copyright 2024 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Tighten screw(s) using hand tools, using electric
tools may damage your Bouncepad.
Orientate, locate & secure the Floorstanding Pole
1
to the Floorstanding Base as shown. Ensure that
all fixings are installed correctly.
Landscape tablet orientation
Portrait tablet orientation
*Before attaching the Mounting Plate, fully clean
the back of the tablet with the provided wipe and
allow it to fully dry.
Remove the Mounting Plate adhesive backing. Attach level &
4
centrally to the Tablet back as shown.
Tablet Mounting
Fixings Kit
Floorstanding
Plate
Floorstanding
Shell
Rubber Collar
Floorstanding Base
Flat Cable
Floorstanding Cover
In the Box
M6 Nylon Locking nut
M6 Split Washer
M6x25mm
Countersunk
screw
2
For optimal adhesion, press firmly and leave for
72hrs in a 20°C environment before use. Do not
reposition. Do not use prior to the 72hrs.
Portrait
Landscape
1x Case
Pole
Washer
4x M4x16mm
Buttonhead
screw
4x M6 Split
Washer
4x M6
Locking Nut
Fixings List
* Due to the modular nature of our product range you may receive additional fixings in the fixings kit
Locate the Floorstanding
Cover over the
Floorstanding Pole.
Attach the Flat Cable
5
to the Tablet with the
U-Bend Head.
4x M4 Split
Washer
1x T20 Pin
Torx Driver Bit
1x Cable
Clamp
4x M6x25mm
Countersunk
screw
Maximum Mounting
surface thickness :
Metric
Imperial
1x Cleaning
25
1"
mm
Wipe
1x PZ3 Pozi
Driver Bit
Tighten screw(s) using hand tools, using electric
tools may damage your Bouncepad.
T20 Pin Torx Driver Bit
M4x16mm
Buttonhead screw
M4 Split Washer
Case Washer
Locate & attach the Shell to the
3
Floorstanding in the correct
orientation.
2x 3mmx6mm Pan
Head Screws
Cable Clamp
T10 Pin Torx Allen
Key
Secure the Flat Cable
to the Mounting Plate
6
with the Cable Clamp as
shown.
2x 3mm x 6mm
Pan Head
Screws
4x M3x10mm
Countersunk
Screw
1x T10 Pin Torx
Allen Key
Advertisement
Related Manuals for bouncepad Core Floorstanding
Summary of Contents for bouncepad Core Floorstanding
- Page 1 * Due to the modular nature of our product range you may receive additional fixings in the fixings kit Tighten screw(s) using hand tools, using electric tools may damage your Bouncepad. M6 Nylon Locking nut M6 Split Washer...
- Page 2 Top Fixing Cover T10 Pin Torx Allen Key 4x M3x10mm Countersunk Screw Bottom Fixing Cover Secure the Tablet to the Connect the tablet Remove the Fixing Covers. Feed the Flat Cable into the assembly & Shell & attach the Fixing power cable to its locate the Tablet in the chosen orientation.
Need help?
Do you have a question about the Core Floorstanding and is the answer not in the manual?
Questions and answers