bouncepad Floorstanding with Brother Printer Mount Assembly Instructions

Floorstanding with
Brother Printer Mount
Assembly Instructions
Tools Required:
Socket Driver
10mm Spanner
*or adjustable spanner
Sheet Code: BP-IM-057_REV1
Release Date: 09/01/2020
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Brother Printer Mount
In the Box
(Printer Mount)
T20 Pin Torx Driver Bit
Remove Neck-Ring using
3
T20 driver bit and Socket
Driver
Floorstanding Base
In the Box
(Floorstanding)
4x M3x10mm
Buttonhead
screw
1x T10 Pin Torx
Allen Key
Tighten screw(s) using hand tools, using electric
Orientate, locate and secure the Floorstanding
1
Fixings List
Pole to the Floorstanding Base as shown. Ensure
(Printer Mount)
that all fixings are installed correctly.
4
Feed the printer's power cable through the Floorstanding Pole
Faceplate
Pair of Keys
Case
Tablet Set-up Kit
Floorstanding
Fixings Kit Rubber Collar
Floorstanding Cover
M6 Nylon Locking nut
tools may damage your Bouncepad.
Floorstanding
Pole
1x Case
Washer
4x M4x20mm
Buttonhead
4x M6 Split
Washer
4x M6
Locking Nut
Fixings List
* Due to the modular nature of our product range
you may receive additional fixings in the fixings kit
M6 Split Washer
M6x25mm
Countersunk
screw
Locate the Floorstanding
2
Cover over the
Floorstanding Pole.
T10 Pin Torx
Allen Key
M3x10mm
Buttonhead
screw
*designed for Brother QL-820WNB
*Printer is not provided.
Attach the printer to
5
the Printer Mount using
M3x10mm Screws
4x M4 Split
Washer
1x T20 Pin
Torx Driver Bit
screw
4x M6x25mm
Countersunk
screw
1x PZ3 Pozi
Driver Bit
(Floorstanding)