Table of Contents
Advertisement
Quick Links
Wing - Freestanding
Assembly Instructions
Tools Required:
All tools provided
Sheet Code:
BP-IM-072_REV0
Release Date:
24/05/2021
Copyright 2016 Spotspot Ltd. (T/A
Bouncepad) all rights reserved.
Confidential, no part of this publication
may be reproduced or transmitted in any
form without the written permission of the
copyright holder.
Locate the Mounting Arm onto the
1
Freestanding Base.
Unlock and remove the Faceplate
4
from the Case Back. Store this aside.
Mounting Arm
Case Back
Mounting Arm
Access Panel
In the Box
Secure the Mounting Arm to the
2
Mount Bracket, with 5x M6x10mm
screws.
Locate and secure the Case Back to
5
the Mounting Arm, with 4x M6x10mm
screws. Ensure good Case alignment.
Faceplate
10x M6x10mm
*fixings to attach the stand to the
Freestanding
Base
Remove the Mounting Arm Access
3
Panel. Safely store this aside for use
later.
*The Case is configured to your order.
If requiring a different tablet
configuration, please contact us.
Install the tablet and the tablet
6
power cable.
2x M4x10mm
Buttonhead
screw
Buttonhead
screw
ground are not provided.
Fixings
List
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for bouncepad Wing
Summary of Contents for bouncepad Wing
- Page 1 Mounting Arm Wing - Freestanding Faceplate Case Back Assembly Instructions Tools Required: 2x M4x10mm Buttonhead All tools provided screw 10x M6x10mm Buttonhead screw *fixings to attach the stand to the ground are not provided. Freestanding Sheet Code: BP-IM-072_REV0 Base Release Date:...
- Page 2 Locate and lock the Faceplate onto the Case Locate and secure the Connect the tablet cable to a power Back. For additional security, install 2x M4x10mm Access Panel to the source. screws to retain the Faceplate. Mounting Arm. For additional security, the stand has Installation is now complete.
Need help?
Do you have a question about the Wing and is the answer not in the manual?
Questions and answers