Kontron KBox E-430-ADN User Manual
  1. Manuals
  2. Brands
  3. Kontron Manuals
  4. Industrial PC
  5. KBox E-430-ADN
  6. User manual
Kontron KBox E-430-ADN User Manual

Kontron KBox E-430-ADN User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER GUIDE
KBox E-430-ADN
Doc. User Guide, Rev. 1.0
Doc. ID: [To be Determined]
www.kontron.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KBox E-430-ADN and is the answer not in the manual?

Questions and answers

Related Manuals for Kontron KBox E-430-ADN

Summary of Contents for Kontron KBox E-430-ADN

  • Page 1  USER GUIDE KBox E-430-ADN Doc. User Guide, Rev. 1.0 Doc. ID: [To be Determined] www.kontron.com...
  • Page 2 KBox E-430-ADN - User Guide, Rev. 1.0 This page has been intentionally left blank www.kontron.com // 2...
  • Page 3 In cases of doubt, please contact Kontron. This user guide is protected by copyright. All rights are reserved by Kontron. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), without the express written permission of Kontron.

  • Page 4: Intended Use

    ENVIRONMENTAL DAMAGE (COLLECTIVELY, "HIGH RISK APPLICATIONS"). You understand and agree that your use of Kontron devices as a component in High Risk Applications is entirely at your risk. To minimize the risks associated with your products and applications, you should provide adequate design and operating safeguards.

  • Page 5: Revision History

    If you have any difficulties using this user guide, discover an error, or just want to provide some feedback, contact Kontron support. Detail any errors you find. We will correct the errors or problems as soon as possible and post the revised user guide on our website.

  • Page 6: Symbols

    KBox E-430-ADN - User Guide, Rev. 1.0 Symbols The following symbols may be used in this user guide DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.

  • Page 7: For Your Safety

    Therefore, in the interest of your own safety and of the correct operation of your new Kontron product, you are requested to conform with the following guidelines.

  • Page 8: Lithium Battery Precautions

    General Instructions on Usage In order to maintain Kontron’s product warranty, this product must not be altered or modified in any way. Changes or modifications to the product, that are not explicitly approved by Kontron and described in this user guide or received from Kontron Support as a special handling instruction, will void your warranty.

  • Page 9: Table Of Contents

    KBox E-430-ADN - User Guide, Rev. 1.0 Table of Contents Symbols ..........................................6 For Your Safety ........................................7 High Voltage Safety Instructions .................................. 7 Special Handling and Unpacking Instruction ............................7 Lithium Battery Precautions ..................................8 General Instructions on Usage ..................................8 Quality and Environmental Management ..............................
  • Page 10 KBox E-430-ADN - User Guide, Rev. 1.0 4.3.2. SATA Data / Power Connector ................................ 28 4.3.3. M.2 Key B Socket ....................................28 4.3.4. M.2 Key E Socket ....................................28 4.3.5. M.2 Key M Socket ....................................28 4.3.6. SIM Card Wafer ..................................... 28 Accessing Internal Components ..............................

  • Page 11: List Of Tables

    Figure 17: Securing Adapter Plate ................................40 Figure 18: Securing DIN Rail Clamp ................................41 Figure 19: Clamping KBox E-430-ADN onto DIN Rail ..........................41 Figure 20: Optional Vertical Wall Mount Plate ............................42 Figure 21: Keyhole Pattern of Vertical Wall Mount Plate ........................42 Figure 22: Unscrew Rear Panel ...................................
  • Page 12 KBox E-430-ADN - User Guide, Rev. 1.0 Figure 24: Securing KBox E-430-ADN onto Mounting Surface Vertically ..................43 Figure 25: Optional Horizontal Wall Mounting Kit ..........................44 Figure 26: Keyhole Pattern of Horizontal Wall Mount Brackets ...................... 44 Figure 27: Removing Screws ..................................45 Figure 28: Securing Horizontal Wall Mount Brackets .........................
  • Page 13 KBox E-430-ADN - User Guide, Rev. 1.0 Figure 78: BIOS Chipset Setup Menu -- - PCH-IO Configuration ....................... 104 Figure 79: BIOS Chipset Setup Menu -- - PCH-IO Configuration -- - PCI Express Configuration..........104 Figure 80: BIOS Chipset Setup Menu -- - PCH-IO Configuration -- - PCI Express Configuration -- - PCIe EQ settings ..105 Figure 81: BIOS Chipset Setup Menu -- - PCH-IO Configuration -- - PCI Express Configuration -- - PCI Express Root Port 3 / 4 / 7 / 9 / 10 .........................................

  • Page 14: 1/ General Safety Instructions For It Equipment

    Kontron is exempt from accident liability, this also applies during the warranty period. The product has been built and tested according to the basic safety requirements for low voltage (LVD) applications and has left the manufacturer in safety-related, flawless condition.
  • Page 15 KBox E-430-ADN - User Guide, Rev. 1.0 Additional safety instructions for DC power supply circuits  To guarantee safe operation of devices with DC power supply voltages larger than 60 volts DC or a power consumption larger than 240 VA, please observe that: the device is set up, installed and operated in a room or enclosure marked with ‘‘RESTRICTED ACCESS’’, if...

  • Page 16: Electrostatic Discharge (Esd)

    KBox E-430-ADN - User Guide, Rev. 1.0 1.1. Electrostatic Discharge (ESD) A sudden discharge of electrostatic electricity can destroy static-sensitive devices or micro-circuitry. Therefore proper packaging and grounding techniques are necessary precautions to prevent damage. Always take the following precautions: 1.
  • Page 17 KBox E-430-ADN - User Guide, Rev. 1.0 Do not dispose of lithium batteries in general trash collection. Dispose of the battery according to the local regulations dealing with the disposal of these special materials, (e.g. to the collecting points for dispose of batteries).

  • Page 18: 2/ Electromagnetic Compatibility

    Consult the dealer or an experienced radio/TV technician for help. Kontron is not responsible for any radio television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Kontron.

  • Page 19: 3/ Shipment And Unpacking

    Kontron for help and information. 3.2. Scope of Delivery 3.2.1. Standard  1x KBox E-430-ADN (corresponding to the ordered system configuration)  1x power terminal block plug connector (attached on the system in case of not ordering power adapter) ...

  • Page 20: 4/ System Overview

    KBox E-430-ADN - User Guide, Rev. 1.0 4/ System Overview The KBox E-430-ADN is a fanless system enclosed within a robust compact aluminum chassis with cooling fins, offering the superior qualities for operation in harsh environments. It can be optionally factory-equipped with an M.2 Key B WWAN and /or M.2 Key E WLAN / Bluetooth card for two antennas.

  • Page 21: System Expansion Capabilities

    4.1.1. System Expansion via SATA Interface The baseboard comes with an onboard SATA 3.0 interface connector and a corresponding power connector. Users can expand the KBox E-430-ADN with a 2.5" SATA HDD / SSD drive. 4.1.2. System Expansion via M.2 Card Interface The baseboard comes with three onboard M.2 interface connectors with Key B Type 2242 / 3042 / 3052 / 2280, Key E...

  • Page 22: Front I/O Panel

    KBox E-430-ADN - User Guide, Rev. 1.0 4.2. Front I/O Panel Figure 1: Front I/O Panel 1 DC-In (see Chapter 4.2.1) 2 Power Button (See Chapter 4.2.2) 3 Power LED (see Chapter 4.2.3) 4 Standby LED (see Chapter 4.2.3) 5 Storage LED (see Chapter 4.2.4) 6 2.5 GbE (see Chapter 4.2.5)

  • Page 23: Dc-In (3-Pin Terminal Block Socket Connector)

    The Storage LED blinks red when the data is being written into or read from the M.2 Key M SSD drive. 4.2.5. 2.5 GbE LAN The KBox E-430-ADN provides two 2.5 GbE LAN ports on the front I/O panel. These connectors are 2.5 Gigabit Ethernet 10/100/1000/2500 Mbit/s, IEEE 1588 capable interfaces. The connectors are standard 8-pin RJ45 type connectors with status LEDs: www.kontron.com...

  • Page 24: Displayport

    4.2.7. DisplayPort over USB 3.2 Gen 2 Type C The KBox E-430-ADN provides a DisplayPort over USB 3.2 Gen 2 Type C connector on the front I/O panel. The conenctor supports USB DisplayPort Alternate mode for transmitting video signals, USB 3.2 Gen 2 for high-speed data transfer and power delivery of up to 15 W (5 V at 3 A) for charging a connected device.

  • Page 25: Antenna Port

    4.2.12. Antenna Port The KBox E-430-ADN reserves two covered cutouts for the Reverse (RP) SMA connectors of the WLAN antennas (M.2 Key E WLAN card with one or two antennas is an option) and / or WWAN antenna (M.2 Key B WWAN card with one or two antennas is an option).

  • Page 26: Internal View

    KBox E-430-ADN - User Guide, Rev. 1.0 4.3. Internal View Figure 3: Internal View (without cover) 1 DDR5 SO-DIMM Memory Socket (DIMM1, see Chapter 4.3.1) 2 SATA Data Connector (CN10, see Chapter 4.3.2) 3 SATA Power Output Wafer (CN8, see Chapter 4.3.2) 4 M.2 Key B Socket (M2B1, see Chapter 4.3.3)

  • Page 27: Figure 4: Internal View (Bottom Side Of The Baseboard)

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 4: Internal View (bottom side of the baseboard) 1 M.2 Key M Socket (M2M1, see Chapter 4.3.5) 2 M.2 Fixing Bolt for Key M Type 22x80 Figure 5: Internal View (back side of the access cover) 1 Access Cover 2 2.5‘‘...

  • Page 28: Ddr5 So-Dimm Memory Socket

    4.3.3. M.2 Key B Socket The KBox E-430-ADN reserves a M.2 Key B socket (Figure 3, pos. 4) with the support of PCIe x1, USB 2.0 and UIM interfaces, allowing the expansion with a Type 22x42 / 30x42 / 22x80 M.2 WWAN module or M.2 SSD drive.

  • Page 29: 5/ Accessing Internal Components

    KBox E-430-ADN - User Guide, Rev. 1.0 5/ Accessing Internal Components This section contains important information that you must read before accessing the internal components. You must follow these procedures properly when installing, removing or handling any board. It is recommended to expand your system with applicable expansion card(s) before it is installed into an equipment, machine or cabinet.

  • Page 30: Opening And Closing The Chassis

    Disconnect all peripherals. 2. The KBox E-430-ADN should lay on a flat, clean surface with the access cover facing upwards. 3. Loosen and remove the Phillips screws (two located on the front I/O panel, two on the rear I/O panel and the other four on the bottom), that secure the access cover to the chassis.

  • Page 31: Installing A So-Dimm Memory Module

    10. For closing replace carefully the access cover to the system and screw it on with the retained screws. Tighten the retained screws when the cover is firmly in place. When used as intended, the KBox E-430-ADN is to operate only in closed condition. Only when the access cover is properly fixed with the screws and the front side with...

  • Page 32: Installing A Hdd / Ssd

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 8: Installing SO-DIMM Memory Module 6. In order to close the device, proceed step 10 described in the subsection 5.1 "Opening and Closing the Chassis". 5.1.2. Installing A HDD / SSD To install a 2.5’’ HDD / SSD please proceed according to the steps described: 1.

  • Page 33: Installing A M.2 Key B Ssd / Expansion Card And / Or A M.2 Key E Expansion Card

    M.2 SSD / expansion card installed into the M.2 Key B socket; Figure 3, pos. 7 for securing the expansion card into the M.2 Key E socket). Depending on the ordered KBox E-430-AND configuration, Kontron may supply fixing bolt extension(s) and adapter bracket to facilitate the installation of different types of M.2 Key B SSD / expansion card.

  • Page 34: Installing A Sim Card

    KBox E-430-ADN - User Guide, Rev. 1.0 5.1.5. Installing A SIM Card To install a SIM card please proceed according to the steps described: 1. Open the device as described in the subsection 5.1 "Opening and Closing the Chassis" (step 1 - 5).

  • Page 35: Figure 15: Connecting I-Pex End

    KBox E-430-ADN - User Guide, Rev. 1.0 8. Repeat Step 2 - - 7 to install the second antenna cable in case two antennas are required and / or two wireless connections are required. 9. In order to close the device, proceed step 10 described in the subsection 5.1 "Opening and Closing the Chassis".

  • Page 36: 6/ Thermal Considerations

    The applied cooling method provides adequate cooling of the device during operation and performs a one-way thermal transfer to the chassis. Three sides of the KBox E-430-ADN consist of a compact aluminum U-shaped chassis are with cooling fins. The cooling fins provide heat dissipation during operation.
  • Page 37 KBox E-430-ADN - User Guide, Rev. 1.0 When the KBox E-430-ADN is extended and configured with third party components like M.2 expansion card(s) and hard drives (HDD or SSD), it has to be taken into account that the air temperature inside the system is higher than the ambient temperature.

  • Page 38: 7/ Installation Instructions

    Refer also to section 10.1.2 ‘‘Mechanical Specifications’’. The KBox E-430-ADN must be firmly attached to a clean flat and solid mounting surface. Use proper fastening materials suitable for the mounting surface. Ensure that the mounting surface type and the used mounting solution safely support the load of the KBox E-430-ADN and the attached components.

  • Page 39: System Mounting

    KBox E-430-ADN configuration with four rubber feet as a desktop unit 7.1.1. DIN Rail Mounting Depending on the ordered KBox E-430-ADN configuration, your system may be supplied with a DIN rail mounting kit (Figure 15). Figure 16: Optional DIN Rail Mounting Kit...

  • Page 40: Figure 17: Securing Adapter Plate

    KBox E-430-ADN - User Guide, Rev. 1.0 1. Secure the adapter plate on the rear or bottom side of the chassis in a horizontal or vertical direction with the supplied screws (M3 x 4 mm) depending on usage requirements, application scenarios and / or surrounding conditions.

  • Page 41: Figure 18: Securing Din Rail Clamp

    4. Clip the top of the DIN rail clamp into the DIN rail and push the bottom of the DIN rail clamp firmly until it clamps onto the bottom of the DIN rail. Figure 19: Clamping KBox E-430-ADN onto DIN Rail ...

  • Page 42: Vertical Wall Mounting

    3 Screw Hole for Securing the Vertical Wall Mount Plate to the Chassis of the KBox E-430-ADN To mount the KBox E-430-ADN with the supplied vertical wall mount plate, the control cabinet / custom enclosure / machine / monitor / wall must have the screw pattern shown as Figure 21 for mounting.

  • Page 43: Figure 22: Unscrew Rear Panel

    Leave approximately 2 mm of clearance between the back of the screw head and the mounting surface. 5. Place the KBox E-430-ADN onto the mounting surface by placing the wide portion of each keyhole slot over the corresponding screw on the mounting surface.

  • Page 44: Horizontal Wall Mounting

    3 Keyhole Slot for Hanging the KBox E-430-ADN with a Screw 4 Screw Hole for Securing the Horizontal Wall Mount Bracket to the Chassis of the KBox E-430-ADN To mount the KBox E-430-ADN with the supplied horizontal wall mount brackets, the control cabinet / custom enclosure / machine / monitor / wall must have the screw pattern shown as Figure 26 for mounting.

  • Page 45: Figure 27: Removing Screws

    Leave approximately 2 mm of clearance between the back of the screw head and the mounting surface. 5. Place the KBox E-430-ADN onto the mounting surface by placing the wide portion of each keyhole slot over the corresponding screw on the mounting surface.

  • Page 46: Vesa Mounting

    (Figure 30). The kit consists of two parts: a base bracket (Figure 30, pos. 1) to be fixed permanently on the mounting surface and another hooked bracket (Figure 30, pos. 2) to hold the KBox E-430-ADN with a hand-screw knob (Figure 30, pos.

  • Page 47: Figure 31: Hole Pattern Of Base Mounting Kit

    Figure 32: Securing Base Mounting Bracket 3. Secure the hooked mounting bracket onto the bottom side of the KBox E-430-ADN (Figure 33) with M3 screws (6 mm long) via the VESA 75 mounting holes. The orientation depends on usage requirements, application scenarios and / or surrounding conditions.

  • Page 48: Figure 33: Securing Hooked Mounting Bracket Onto Kbox E-430-Adn

    / scenarios / conditions. conditions. 4. Place the KBox E-430-ADN onto the mounting surface by sliding the hooked mounting bracket into the based mounting bracket (Figure 34). 5. Secure the hand-screw knob located on the hooked mounting bracket to fix two brackets (Figure 34).

  • Page 49: Dc Power Connection

    5 Location for inserting the negative (-) input wire In case of ordering a power adapter (AC to DC 24 V) as well as a power cord from Kontron, the 3-pin terminal block plug connector (Figure 35) should be well attached to the power adapter. For DC power connection, users can use the power cord and power adapter to carry AC power from AC power source and then convert it into DC 24 V.
  • Page 50 KBox E-430-ADN - User Guide, Rev. 1.0 4. Insert the wires into the corresponding clamp of the terminal block plug connector. Make sure that you have the right polarity of the connection [refer to Figure 35 or subsection 11.1 "DC Power Input"].

  • Page 51: 8/ Start Up

    8.1. Connecting to DC Power Supply The DC-In terminal block socket connector (Figure 1, pos. 1) is located on the front side of the KBox E-430-ADN. The KBox E-430-ADN will be connected to a DC main power supply via the supplied terminal block plug connector (Figure 35) and corresponding power wires (prepared as described in the subsection 7.2.1 "Cabling"), or to a AC-to-DC power...
  • Page 52 3. Connect the terminal block plug connector prepared as described in the subsection 7.2.1 "Cabling" to the DC-In terminal block socket connector (Figure 1, pos. 1) of the KBox E-430-ADN. The DC input connector is located on the front side.

  • Page 53: Operating System And Hardware Component Drivers

    If you have ordered the KBox E-430-ADN without a pre-installed operating system, you will need to install the operating system and the appropriate drivers for the system configuration you have ordered (optional hardware components) yourself.

  • Page 54: 9/ Maintenance And Cleaning

    9/ Maintenance and Cleaning Equipment from Kontron requires only minimum servicing and maintenance for proper operation.  For light soiling, clean the KBox E-430-ADN with a dry cloth. Carefully remove dust from the surface of the chassis using a clean, soft brush. ...

  • Page 55: Technical Specifications

    KBox E-430-ADN - User Guide, Rev. 1.0 Technical Specifications Table 2: Technical Specifications System Processor  Intel® Core™ i3 N-Series Processors Intel® N-Series Processors  Memory  2x DDR5 SO-DIMM Video Display Interface  3x DP (2x Full-size, 1x DP USB-C)

  • Page 56: Mechanical Specifications

    KBox E-430-ADN - User Guide, Rev. 1.0 System OS Support  Windows 11, Windows 10, Linux 10.1. Mechanical Specifications Table 3: Mechanical Specifications Construction  Aluminum Metal Chassis Dimensions (W x D x H) 205 mm x 126.6 mm x 65.5 mm / 8.07’’ x 4.98’’ x 2.58’’...

  • Page 57: Environmental Conditions

    KBox E-430-ADN - User Guide, Rev. 1.0 10.2. Environmental Conditions Table 4: Environmental Conditions Operating Temperature  0 °C ~ 50 °C / 32 °F ~ 122 °F Storage Temperature  -20 °C ~ 80 °C / -4 °F ~ 176 °F Humidity ...

  • Page 58: 11/ Standard Interfaces

    KBox E-430-ADN - User Guide, Rev. 1.0 11/ Standard Interfaces -- - Pin Assignments Low-active signals are indicated by a minus sign. 11.1. DC Power Input Table 6: DC Power Input (see Figure 1, pos. 1) Signal Name 3-pin Terminal Block Socket Connector...

  • Page 59: Displayport Connector

    KBox E-430-ADN - User Guide, Rev. 1.0 11.3. DisplayPort Connector Table 8: DisplayPort Connector (see Figure 1, pos. 7) Signal Name DisplayPort Connector ML_Lane0p ML_Lane0n ML_Lane1p ML_Lane1n ML_Lane2p ML_Lane2n ML_Lane3p ML_Lane3n Config1 Config2 AUX_CHp AUX_CHn Hot_Plug DP_PWR www.kontron.com // 59...

  • Page 60: Displayport Over Usb 3.2 Gen 2 Type C Connector

    KBox E-430-ADN - User Guide, Rev. 1.0 11.4. DisplayPort over USB 3.2 Gen 2 Type C Connector Table 9: DisplayPort over USB 3.2 Gen 2 Type C Connector (see Figure 1, pos. 8) Signal Name USB Type C Connector CON_TX1P_C...

  • Page 61: Usb 2.0 Connector

    N/A* N/A* * Kontron’s default setting. Users can alternatively connect it to Pin 10 in the wafer for +5V signal. 11.8. COM 3 & COM 4 RS232/422/485 Serial Port Table 13: COM 3 & COM 4 RS232/422/485 Serial Port (see Figure 1, pos. 13 & 14)

  • Page 62: Digital I/O Port

    KBox E-430-ADN - User Guide, Rev. 1.0 11.9. Digital I/O Port Table 14: Digital I/O Port (see Figure 1, pos. 15) Signal Name 9-pin D-SUB Female Connector DIO_0 DIO_1 DIO_2 DIO_3 DIO_4 DIO_5 DIO_6 DIO_7 www.kontron.com // 62...

  • Page 63: 12/ Bios

    Supervisor Password (see Security menu), press <RETURN>, and proceed with step 5. 5. A setup menu will appear. The KBox E-430-ADN uEFI BIOS setup program uses a hot key-based navigation system. A hot key legend bar is located on the bottom of the setup screens.

  • Page 64: Starting The Uefi Bios

    KBox E-430-ADN - User Guide, Rev. 1.0 12.2. Starting the uEFI BIOS The Setup utility features shows six menus in the selection bar at the top of the screen:  Main  Advanced  Chipset  Security  Boot ...

  • Page 65: Figure 37: Bios Main Menu Screen System Data And Time

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 37: BIOS Main Menu Screen System Data and Time Aptio Setup - - AMI Main Advanced Chipset Security Boot Save & Exit Product Information Product Name KBox E-430-ADN BIOS Information BIOS Vendor...
  • Page 66 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Main Advanced Chipset Security Boot Save & Exit Dual Output Fast Read support Supported Read ID / Status Clock Freq 50 MHz Write and Erase Clock Freq 50 MHz...

  • Page 67: Figure 38: Bios Main Menu Screen - - Platform Information

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 38: BIOS Main Menu Screen -- - Platform Information Aptio Setup - - AMI Main Product Information Product Name KBox E-430-ADN Serial # Default string UUID 00020003-0004-0005-0006-000700080009 KSC Information Controller KSC Main Controller...

  • Page 68: Advanced Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 12.2.2. Advanced Setup Menu The Advanced setup menu provides sub-screens and functions for advanced configurations. The following sub- screen functions are included in the menu:  cTDP, IBECC, Compliance Test, Audio, Power Mode & ME FW Image Re-Flash Configuration ...

  • Page 69: Figure 39: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 39: BIOS Advanced Menu Aptio Setup - - AMI Main Advanced Chipset Security Boot Save & Exit Configurable TDP Mode [15W] In-Band ECC Support [Disabled] Compliance Test Mode [Disabled] HD Audio [Enabled]...

  • Page 70: Figure 40: Bios Advanced Menu - Display Configuration

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 40: BIOS Advanced Menu - Display Configuration Aptio Setup - - AMI Advanced Display Configuration Primary Display [IGFX] → ←: Select Screen Internal Graphics [Enabled] ↑ ↓: Select Item Aperture Size [256MB] Enter: Select +/-: Change Opt.

  • Page 71: Figure 41: Bios Advanced Menu - Trusted Computing

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 41: BIOS Advanced Menu - Trusted Computing Aptio Setup - - AMI Advanced TPM 2.0 Device Found Firmware Version: 16.13 Vendor: Security Device Support [Enabled] Active PCR banks* SHA256 Available PCR banks*...
  • Page 72 KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description Device Select [TPM 1.2], TPM 1.2 will restrict support to TPM 1.2 devices, TPM 2.0 will restrict support to TPM 2.0 devices, Auto will support both with [TPM 2.0], default set to TPM 2.0 devices if not found, TPM 1.2 devices will [Auto] be enumerated.

  • Page 73: Figure 42: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 42: BIOS Advanced Menu -- - ACPI Settings Aptio Setup - - AMI Advanced ACPI Settings Enable ACPI Auto Configuration [Disabled] → ←: Select Screen ↑ ↓: Select Item Enable Hibernation* [Enabled]...

  • Page 74: Figure 43: Bios Advanced Menu

    Create GSPI ACPI dev [Disabled], If set to ‘Kontron Linux BSP’ then a generic GSPI device will be created in ACPI space to be used by Kontron Linux BSP. ‘Win10 [Kontron Linux BSP], RhProxy style’ supports this driver type under Win10.

  • Page 75: Figure 45: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Advanced Allows to preset GPIOs during BIOS startup. GPIO OS usable [GPIO 0 - - GPIO 7] Control DIO in BIOS [Disabled] DIO #0* [Skip] Output level* [Low]...
  • Page 76 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Advanced Lock FW update access [Enabled] → ←: Select Screen ↑ ↓: Select Item > KSC OTP area control Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...
  • Page 77 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Advanced ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.22.1293 Copyright (C) 2025 AMI...
  • Page 78 KBox E-430-ADN - User Guide, Rev. 1.0 Figure 49: BIOS Advanced Menu -- - Miscellaneous -- - Watchdog Aptio Setup - - AMI Advanced Watchdog Configuration. Auto-reload [Disabled] Global Lock [Disabled] WDT Strobe [Disabled] Stage 1 Mode [Disabled] Assert WDT Signal...
  • Page 79 KBox E-430-ADN - User Guide, Rev. 1.0 Figure 50: BIOS Advanced Menu -- - H/W Monitor Aptio Setup - - AMI Advanced KSC based H/W Monitor Temperature sensors: #1: CPU Temp : + 52.4 C #2: PCH Temp : + 49.0 C →...
  • Page 80 KBox E-430-ADN - User Guide, Rev. 1.0 Figure 51: BIOS Advanced Menu -- - S5 RTC Wake Settings Aptio Setup - - AMI Advanced Wake system from S5 [Disabled] Wake up hour Wake up minute → ←: Select Screen Wake up second ↑...

  • Page 81: Figure 53: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 52: BIOS Advanced Menu -- - Serial Port Console Redirection Aptio Setup - - AMI Advanced COM0 Console Redirection [Disabled] > Console Redirection Settings* COM1 Console Redirection [Disabled] > Console Redirection Settings*...
  • Page 82 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Advanced Parity [None] Enter: Select Stop Bits +/-: Change Opt. Flow Control [None] F1: General Help VT-UTF8 Combo Key Support [Enabled] F2: Previous Values Recorder Mode [Disabled] F3: Optimized Defaults...

  • Page 83: Figure 54: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description Putty KeyPad [VT100], Select FunctionKey and KeyPad on Putty. [LINUX], [XTERMR6], [SCO], [ESCN], [VT400] Figure 54: BIOS Advanced Menu -- - Serial Port Console Redirection -- - Legacy Console Redirection Settings...
  • Page 84 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Advanced Data Bits EMS Enter: Select Parity EMS None +/-: Change Opt. Stop Bits EMS F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.22.1293 Copyright (C) 2025 AMI...

  • Page 85: Figure 56: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 56: BIOS Advanced Menu -- - AMI Graphic Output Protocol Policy Aptio Setup - - AMI Advanced Intel® Graphics Controller Intel® GOP Driver [21.0.1063] Output Select [DP3 [ACTIVE]] → ←: Select Screen ↑...

  • Page 86: Figure 57: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 57: BIOS Advanced Menu -- - SIO Configuration Aptio Setup - - AMI Advanced AMI SIO Driver Version: A5.19.00 Super IO Chip Logical Devices(s) Configuration → ←: Select Screen > [*Active*] Serial Port 0 ↑...

  • Page 87: Figure 60: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Advanced Serial Port 1 Configuration Use This Device [Enabled] → ←: Select Screen ↑ ↓: Select Item Logical Device Settings:* Enter: Select Current: IO=2F8h; IRQ=3;* +/-: Change Opt.

  • Page 88: Figure 61: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description [Enabled] Possible: [Use Automatic Settings], Allows the user to change the device resource settings. New settings will be reflected on this [IO=220h; IRQ=7; DMA;], setup page after system restarts. [IO=220h; IRQ=5,6,7,10,11,12; DMA;]...

  • Page 89: Figure 62: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 62: BIOS Advanced Menu -- - USB Configuration Aptio Setup - - AMI Advanced USB Configuration USB Module Version USB Controllers: 2 XHCIs USB Devices: 1 Keyboard Legacy USB Support [Enabled] → ←: Select Screen...
  • Page 90 KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description descriptor. Device power-up Value input Delay range is 1..40 seconds, in one second increments delay in seconds www.kontron.com // 90...

  • Page 91: Figure 63: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 63: BIOS Advanced Menu -- - Network Stack Configuration Aptio Setup - - AMI Advanced Network Stack [Disabled] IPv4 PXE Support* [Disabled] IPv4 HTTP Support* [Disabled] → ←: Select Screen IPv6 PXE Support* [Disabled] ↑...

  • Page 92: Figure 64: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 64: BIOS Advanced Menu -- - NVMe Configuration Aptio Setup - - AMI Advanced NVMe Configuration No NVME Device Found → ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.

  • Page 93: Figure 65: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 65: BIOS Advanced Menu -- - F81435 Configurations Aptio Setup - - AMI Advanced F81435 Configurations COM1 Mode Selection [RS-232] COM1 Transceiver [Normal mode] COM1 Internal Terminator Switch Control [Terminator switch is disabled]...

  • Page 94: Figure 66: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 66: BIOS Advanced Menu -- - Tls Auth Configuration Aptio Setup - - AMI Advanced > Server CA Configuration > Client Cert Configuration* → ←: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.
  • Page 95 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Advanced > Discard Changes and Exit +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.22.1293 Copyright (C) 2025 AMI...

  • Page 96: Figure 69: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 69: BIOS Advanced Menu -- - RAM Disk Configuration Aptio Setup - - AMI Advanced Disk Memory Type: [Boot Service Data] > Create raw → ←: Select Screen > Create from file ↑...

  • Page 97: Figure 71: Bios Advanced Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 71: BIOS Advanced Menu -- - Intel® Ethernet Controller I226-V -- - C0:EA:C3:D1:D0:CA/CB Aptio Setup - - AMI Advanced UEFI Driver Intel® 2.5G Ethernet Controller 0.10.06 Device Name Intel® Ethernet Controller I226-V →...

  • Page 98: Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 12.2.3. Chipset Setup Menu The Chipset setup menu provides functions and a sub-screen for chipset configurations. The following sub-screen functions are included in the menu:  System Agent (SA) Configuration  PCH-IO Configuration...

  • Page 99: Figure 73: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 73: BIOS Chipset Setup Menu -- - System Agent (SA) Configuration Aptio Setup - - AMI Chipset System Agent (SA) Configuration VT-d Supported → ←: Select Screen ↑ ↓: Select Item > Graphics Configuration Enter: Select +/-: Change Opt.
  • Page 100 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Chipset Enable Display Audio Link in Pre-OS [Disabled] F2: Previous Values IUER Button Enable [Disabled] F3: Optimized Defaults > LCD Control F4: Save & Exit > Intel® Ultrabook Event Support ESC: Exit Version 2.22.1293 Copyright (C) 2025 AMI...

  • Page 101: Figure 75: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description IUER Button Enable [Disabled], Enable / Disable IUER Button Functionality [Enabled] Figure 75: BIOS Chipset Setup Menu -- - System Agent (SA) Configuration -- - Graphics Configuration -- - External Gfx Card...

  • Page 102: Event Support

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description [1400x1050 LVDS1], [1400x1050 LVDS2], [1600x1200 LVDS], [1280x768 LVDS], [1680x1050 LVDS], [1920x1200 LVDS], [1600x900 LVDS], [1280x800 LVDS], [1280x600 LVDS], [2048x1536 LVDS], [1366x768 LVDS] Panel Scaling [Auto], Select the LCD panel scaling option used by the Internal Graphics Device.
  • Page 103 KBox E-430-ADN - User Guide, Rev. 1.0 These items appear only when enabling IUER Slate Enable. These items appear only when enabling IUER Dock Enable. Feature Option Description IUER Slate Enable [Disabled], Enable / Disable IUER Slate Functionality [Enabled] Slate Mode boot [Slate Mode], Choose Slate or Laptop as boot mode.

  • Page 104: Figure 79: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 78: BIOS Chipset Setup Menu -- - PCH-IO Configuration Aptio Setup - - AMI Chipset PCH-IO Configuration > PCI Express Configuration > SATA Configuration → ←: Select Screen > USB Configuration ↑ ↓: Select Item Enter: Select >...

  • Page 105: Figure 80: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Chipset > PCI Express Root Port 4 PCI Express Root Port 5 Not present in this SKU PCI Express Root Port 6 Not present in this SKU → ←: Select Screen >...
  • Page 106 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Chipset Preset 0* Preset 1* Preset 2* Preset 3* Preset 4* Preset 5* Preset 6* Preset 7* Preset 8* Preset 9* Preset 10* Pre-cursor coefficient 0* Post-cursor coefficient 0*...

  • Page 107: Figure 81: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description EQ], [Use coefficients Preset mode - - root port will use presets during EQ process, during EQ] Coefficient mode - - root port will use coefficients during EQ process EQ PH1 downstream...
  • Page 108 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Chipset Transmitter Half Swing* [Disabled] Detect Timeout* Extra Bus Reserved* Reserved Memory* Reserved I/O* PCH PCIe LTR Configuration* LTR* [Enabled] Snoop Latency Override* [Auto] → ←: Select Screen Snoop Latency Value* ↑...
  • Page 109 KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description [Disabled], Enable / Disable Downstream Port Containment [Enabled] EDPC [Disabled], Enable / Disable Rootport extensions for Downstream Port Containment [Enabled] [Disabled], PCI Express Unsupported Request Reporting Enable / Disable. [Enabled] [Disabled], PCI Express Device Fatal Error Reporting Enable / Disable.

  • Page 110: Figure 82: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description [32768 ns], [1048576 ns], [33554432 ns] Non Snoop Latency [Disabled], Non Snoop Latency Override for PCH PCIE. Override [Manual], [Disabled]: Disable override. [Auto] [Manual]: Manually enter override values. [Auto] (default): Maintain default BIOS flow.

  • Page 111: Figure 83: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description Clock0..9 assignment [Platform-POR], [Platform-POR]: clock is assigned to PCIe port or LAN according to board layout. [Enabled], [Enabled]: keep clock enabled even if unused. [Disabled] [Disabled]: Disable clock. ClkReq for Clock0..9...
  • Page 112 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Chipset SATA Port 1 DevSlp* [Disabled] DITO Configuration* [Disabled] DITO Value* DM Value* Serial ATA Port 2* Empty Software Preserve* Unknown Port 2* [Enabled] Hot Plug* [Disabled] Configured as eSATA*...

  • Page 113: Figure 84: Bios Chipset Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description Spin Up Device [Disabled], If enabled for any of ports Staggerred Spin Up will be performed and only the drives which have this option enabled will spin up [Enabled] at boot. Otherwise all drives spin up at boot.
  • Page 114 KBox E-430-ADN - User Guide, Rev. 1.0 Aptio Setup - - AMI Chipset USB SW Device Mode Port #8* [Disabled] USB SW Device Mode Port #9* [Disabled] USB SS Physical Connector #0* [Enabled] USB SS Physical Connector #1* [Enabled] USB SS Physical Connector #2*...
  • Page 115 KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description be detected by BIOS or OS. USB HS Physical [Disabled], Enable / Disable this USB Physical Connector (physical port). Connector #0..9 Once disabled, any USB devices plug into the connector will not [Enabled] be detected by BIOS or OS.

  • Page 116: Security Setup Menu

    The Security setup menu provides information about the passwords and functions for specifying the security settings. The passwords are case-sensitive. The KBox E-430-ADN provides no factory-set passwords. If there is already a password installed, the system asks for this first. To clear a password, simply enter nothing and acknowledge by pressing <RETURN>.

  • Page 117: Figure 86: Bios Security Setup Menu - - Secure Boot

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 86: BIOS Security Setup Menu -- - Secure Boot Aptio Setup - - AMI Security System Mode Setup Secure Boot [Enabled] → ←: Select Screen Not Active ↑ ↓: Select Item Enter: Select...

  • Page 118: Figure 87: Bios Security Setup Menu - - Secure Boot - - Key Management

    KBox E-430-ADN - User Guide, Rev. 1.0 Figure 87: BIOS Security Setup Menu -- - Secure Boot -- - Key Management Aptio Setup - - AMI Security Vendor Keys Valid Factory Key Provision [Disabled] > Restore Factory Keys > Reset To Setup Mode >...
  • Page 119 KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description [Delete] Forbidden Signatures [Details], (dbx) [Export], [Update], [Append], [Delete] Authorized [Update], TimeStamps (dbt) [Append] OsRecovery [Update], Signatures (dbr) [Append] www.kontron.com // 119...

  • Page 120: Remember The Password

    KBox E-430-ADN - User Guide, Rev. 1.0 12.2.4.1. Remember the password It is highly recommended to keep a record of all passwords in a safe place. Forgotten passwords results in being locked out of the system. If the system cannot be booted because the User Password or the Supervisor Password are not known, contact Kontron Support for further assistance.

  • Page 121: Boot Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 12.2.5. Boot Setup Menu The boot setup menu lists the boot device priority order, that is generated dynamically. Figure 88: BIOS Boot Setup Menu Aptio Setup - - AMI Main Advanced Chipset Security Boot Save &...
  • Page 122 KBox E-430-ADN - User Guide, Rev. 1.0 Feature Option Description [Enabled] UFS Support [Disabled], If Disabled, UFS device will be skipped. [Enabled] VGA Support [Auto], If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post. Efi driver will still be [EFI Driver] installed with EFI OS.

  • Page 123: Save & Exit Setup Menu

    KBox E-430-ADN - User Guide, Rev. 1.0 12.2.6. Save & Exit Setup Menu The exit setup menu provides functions for handling changes made to the UEFI BIOS settings and the exiting of the setup program. Figure 89: BIOS Save & Exit Setup Menu...

  • Page 124: Appendix A: List Of Acronyms

    KBox E-430-ADN - User Guide, Rev. 1.0 Appendix A: List of Acronyms The following table does not contain the complete acronyms used in signal names, signal type definitions or similar. A description of the signals is included in the I/O Connector and Internal connector chapters within this user guide.

  • Page 125: About Kontron

    KBox E-430-ADN - - User Guide, Rev. 1.0 About Kontron Kontron is a global leader in IoT / Embedded Computing Technology (ECT) and offers individual solutions in the areas of Internet of Things (IoT) and Industry 4.0 through a combined portfolio of hardware, software and services.

This manual is also suitable for:

Kbox e-430-adn-0-n97Kbox e-430-adn-3-i3-n305

Table of Contents