Arm Status Reply
On receiving an Arm Status request message, the system returns a status message to
the sender. This message includes the system status and the descriptor of the user or
the device used to arm/disarm the system.
The following example shows an Arm Status reply where the system has been fully
armed by a user named Mark.
F
U
L
L
A
R
M
E
D
-
M
A
R
K
3.6: Remote Arming/Disarming via the Telephone
Using the Telecontrol feature, you can "Full" arm and disarm the system via the
telephone. For further information on the Telecontrol features, see Chapter Six:
Telecontrol.
ProGuard800™
-13-