Arm Status Indication; Arming Tones; Remote Arming/Disarming Via Sms - Marmitek PROGUARD 800 User Manual

3.3: Arm Status Indication

The system's arm status is displayed on the front
panel only. The following table explains the
various arm status descriptions that appear on
the LCD display.
This...
DISARMED
FULL ARMED
PART ARMED
PERIMETER ARMED
FULL ARMING
PART ARMING
PERIMETER ARMING
PART ARMED INST
PERIM ARMED INST
PART ARMING INST
PERI ARMING INST
The system may be programmed to display arm status at all times or only for the first two
minutes after you arm or disarm the system.

3.4: Arming Tones

Arming tones are the chimes that the system
sounds during the entry/exit delay and when the
system arms or disarms. Various options are
available that determine the pattern of these tones.
Arming tones may be sounded by either the external wireless siren or the control panel's
built-in siren.

3.5: Remote Arming/Disarming via SMS

You can arm and disarm the system remotely by sending the SMS commands from a
cellular phone to the cellular communications module.
Each SMS command contains the following elements:
•
SMS Command Descriptor (up to 43 characters of free text)
•
# (separates the descriptor from the actual command)
•
User Code
•
Command (120=Disarm, 121=Full Arm, 122=Part Arm, 123=Perimeter
Arm, 124=Full + Perimeter Arm, 125=Part + Perimeter Arm, 200 = Arm
Status)
The following example shows the format of an SMS command for disarming the system:
SMS Command Descriptor
D
While the SMS Command Descriptor is optional, you must start the SMS command with
the # symbol for the system to accept the command.
-12-
Means...
The system is disarmed.
The system has been armed using the displayed arming method.
The system is in the process of arming (displayed during exit delay).
The system has been armed using the displayed arming method with
the Instant arm feature activated.
The system is in the process of arming with the Instant arm feature
activated.
i s a r m
User Code
# 1 2 3 4
DISARMED
11:22:02
FULL ARMING
7 TO EXIT
Command
1 2 0
© MARMITEK